1、 ENGINEERING MATERIAL SPECIFICATION Material Name Specification Number Date Action Revisions 2003 04 16 Revised Para 3.0 inserted; Para 3.1, 3.2, 3.3, 3.9, 4 deleted 2001 10 02 Activated M. Dumitrescu Printed copies are uncontrolled Page 1 of 2 Copyright 2003, Ford Global Technologies, Inc. FABRIC,
2、STATIC PATTERN, WOVEN JACQUARD WSS-M1H873-A 1. SCOPE The material defined by this specification is a Jacquard pattern, flat woven bodycloth of good quality and uniform composition. 2. APPLICATION This specification was released originally for material used as an insert of seat fabric for the 2004 Ma
3、verick/Escape XTL 3. REQUIREMENTS Material specification requirements are to be used for initial qualification of materials. In addition to the requirements listed herein, the fabric shall meet all requirements of: WSS-M8P18-A1/A4. 3.0 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material supplier
4、s and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.4 FABRIC CONSTRUCTION 3.4.1 Fabric Count, +/- 5 % tolerance (ASTM D 3775) Warp 177 ends/10 cm Fill 185 picks/10 cm 3.4.2 Fabric Weight, range (FLTM BN 106-01) Face Fabric w/ backcoat
5、220-290 g/m2Laminated to 3mm foam 340-410 g/m2ENGINEERING MATERIAL SPECIFICATION WSS-M1H873-A Page 2 of 2 Copyright 2003, Ford Global Technologies, Inc. 3.5 COMPOSITION (ASTM D 629) Tolerance as specified in WSS-M8P18-A1/A4. Fabric 100 % Semi-dull round Polyester Backcoating 34 g/m2polyvinyl chloride 3.6 YARN CONSTRUCTION (ASTM D 1244) Warp 16.7 tex f34 (natural textured polyester) x 3 Fill 16.7 tex f33 (solution dyed polyester) x 3 3.7 METHOD OF DYEING Piece dyed 3.8 FINISHING OPERATIONS Dye, Dry, Coat, Inspection
