1、 ENGINEERING MATERIAL SPECIFICATION Material Name Specification Number Date Action Revisions 2003 04 17 Revised Para 3.0 inserted; Para 3.1, 3.2, 3.3, 3.9, 4, deleted 2002 01 30 Activated M. Dumitrescu Printed copies are uncontrolled Page 1 of 2 Copyright 2003, Ford Global Technologies, Inc. FABRIC,
2、 MAX PATTERN, FLAT WOVEN WSS-M1H879-A 1. SCOPE The material defined by this specification is a MAX pattern, Jacquard flat woven bodycloth of good quality and uniform composition. 2. APPLICATION This specification was released originally for material used as an insert of seat fabric for the 2005 MOUN
3、TAINEER. 3. REQUIREMENTS Material specification requirements are to be used for initial qualification of materials. In addition to the requirements listed herein, the fabric shall meet all requirements of: WSS-M8P18-A1/A4. 3.0 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and par
4、t producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.4 FABRIC CONSTRUCTION 3.4.1 Fabric Count, +/- 5 % tolerance (ASTM D 3775) Warp 185 ends/10 cm Fill 190 picks/10 cm 3.4.2 Fabric Weight, range (FLTM BN 106-01) Face Fabric w/ backcoat 342 - 442
5、 g/m2Laminated to 3mm foam 450 - 550 g/m2ENGINEERING MATERIAL SPECIFICATION WSS-M1H879-A Page 2 of 2 Copyright 2003, Ford Global Technologies, Inc. 3.5 COMPOSITION (ASTM D 629) Tolerance as specified in WSS-M8P18-A1/A4. Fabric 100 % Semi-Dull Polyester Backcoating Acrylic 3.6 YARN CONSTRUCTION (ASTM
6、 D 1244) Warp A 44% 62 tex f141 (air jet textured semi-dull polyester) polyester) x 3 Fill W 43% 62 tex f141 (air jet textured semi-dull polyester) X 13%132 tex f282 (air textured semi-dull polyester ) 3.7 METHOD OF DYEING Yarn/Package/Disperse Dyes 3.8 FINISHING OPERATIONS Wash, Backcoat, Dry, Laminate, Inspect
