1、 ENGINEERING MATERIAL SPECIFICATION Material Name Specification Number Date Action Revisions 2008 12 08 N-STATUS No Replacement L. Schmalz, FNA / M. Montgomery, FOE2002 10 31 Activated N. J. Komatsu Printed copies are uncontrolled Page 1 of 2 Copyright 2008, Ford Global Technologies, Inc. FABRIC, TA
2、BBY DESIGN, PILE KNITTED, WSS-M1H914-A UNLAMINATED NOT TO BE USED FOR NEW DESIGN 1. SCOPE The material defined by this specification is a pile warp knitted 28 gauge polyester face fabric. 2. APPLICATION This specification was released originally for material used as an interior trim fabric for 2003
3、C195. 3. REQUIREMENTS In addition to the requirements listed herein, the fabric shall meet all requirements of WSS-M8P18-A1/A2/A3/A4 as applicable. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Producti
4、on Materials (WSS-M99P1111-A). 3.2 FABRIC CONSTRUCTION 3.2.1 Fabric Count, +/- 10 % tolerance (ASTM D 3887) Wales 115 wales/10 cm Courses 270 courses/10 cm 3.2.2 Fabric Weight, +/- 15 % tolerance 310 g/m2(FLTM BN 106-01) 3.3 COMPOSITION (ASTM D 629) Fabric 100 % polyester 3.4 YARN CONSTRUCTION (ASTM
5、 D 1244) Ground 89 dtex f34 (polyester, filament yarn, round semi-dull) Pile 89 dtex f34 (polyester, texturized, round, semi-dull) ENGINEERING MATERIAL SPECIFICATION WSS-M1H914-A Page 2 of 2 Copyright 2008, Ford Global Technologies, Inc. 3.5 METHOD OF DYEING Yarn dyed or as approved by Materials Eng
6、ineering 3.6 FINISHING OPERATIONS As approved by Materials Engineering 4. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. 4.1 Purchase departments will ensure that both materials defined in this specification and shipped to any one assembly plant will be produced by one supplier only.
