1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2004 06 25 Activated N. J. Komatsu Printed copies are uncontrolled Copyright 2004, Ford Global Technologies, LLC Page 1 of 2 FABRIC, WIRE PATTERN, WOVEN DOBBY, WSS-M1H942-A UNLAMINATED 1. SCOPE The material defined by this specification is a w
2、oven jacquard polyester face fabric. 2. APPLICATION This specification was released originally for material used as an interior trim fabric for use in the 2004 model year. 3. REQUIREMENTS In addition to the requirements listed herein, the fabric shall meet all requirements of WSS-M8P18-A1/A2/A3/A4 a
3、s applicable. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.2 FABRIC CONSTRUCTION 3.2.1 Fabric Count, +/- 10% tolerance (ASTM D 3775) Warp 290 ends/10 cm Weft 16
4、0 picks/10 cm 3.2.2 Fabric Weight, +/- 15% tolerance (FLTM BN 106-01) 375 g/m23.3 COMPOSITION (ASTM D 629) Fabric 100% polyester 3.4 YARN CONSTRUCTION (ASTM D 1244) Warp 600 dtex f192 (air texturized, Round) Warp 620 dtex f144 (air texturized, Round, highlight yarn) ENGINEERING MATERIAL SPECIFICATIO
5、NWSS-M1H942-A Printed copies are uncontrolled Copyright 2004, Ford Global Technologies, LLC Page 2 of 2 Weft 1150 dtex f320(air texturized, Round) Weft (monofil, 0.3mm, diam, round, stretch, black) Weft 620 dtex f144(air texturized, round) 3.5 METHOD OF DYEING Yarn dyed or as approved by Materials E
6、ngineering 3.6 FINISHED OPERATIONS As approved by Materials Engineering 4. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. 4.1 Purchase departments will ensure that both materials defined in this specification and shipped to any one assembly plant will be produced by one supplier only.
