1、 ENGINEERING MATERIAL SPECIFICATION Date Action Revisions 2015 12 09 N Status No replacement named D. Murtonen,NA 2005 01 21 Activated L. Neves Copyright 2015, Ford Global Technologies, LLC Page 1 of 2 FABRIC, LUGANO MIDNIGHT BLACK PATTERN, WARP KNITTED, WSS-M1H980-A UNLAMINATED NOT TO BE USED FOR N
2、EW DESIGN 1. SCOPE The material defined by this specification is a warp knitted polyester fabric. 2. APPLICATION This specification was released originally for material used as an interior trim fabric for 2005 Model Year. 3. REQUIREMENTS In addition to the requirements listed herein, the fabric shal
3、l meet all requirements of WSS-M8P18-A1/A2/A3/A4 as applicable. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.2 FABRIC CONSTRUCTION 3.2.1 Fabric Count, +/- 10% t
4、olerance (ASTM D 3775) Wales 140 wales/10cm Courses 220 courses/10 cm 3.2.2 Fabric Weight, +/- 10% tolerance 245 g/m (FLTM BN 106-01) 3.3 COMPOSITION (ASTM D 629) Fabric 100% Polyester 3.4 YARN CONSTRUCTION (ASTM D 1244) Pile 70 dtex f36, Semi-Dull, Round, Textured Polyester Back 70 dtex f36, Semi-D
5、ull, Round, Flat Polyester 3.5 METHOD OF DYEING Piece Dyed ENGINEERING MATERIAL SPECIFICATION WSS-M1H980-A Copyright 2015, Ford Global Technologies, LLC Page 2 of 2 3.6 FINISHING OPERATIONS Knit, Dye, Raise, Heat Set 3.7 FLAMMABILITY (ISO 3795/SAE J369) Burn Rate, max 100 mm/minute Note: Not require
6、d on face fabric when used as a fully bonded composite. 4. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. 4.1 Purchase departments will ensure that material defined in this specification and shipped to anyone assembly plant will be produced by one supplier only.
