1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2006 07 19 Activated N. J. Komatsu Printed copies are uncontrolled Copyright 2006, Ford Global Technologies, LLC Page 1 of 2 FABRIC, KADO DESIGN, WEFT KNITTED, WSS-M1H996-A UNLAMINATED 1. SCOPE The material defined by this specification is a w
2、eft knitted jacquard 20 gauge polyester face fabric. 2. APPLICATION This specification was released originally for material used as an interior trim fabric for 2006 Transit. 3. REQUIREMENTS Material specification requirements are to be used for initial qualification of materials. In addition to the
3、requirements listed herein, the fabric shall meet all requirements of WSS-M8P18-A1/A2/A3/A4 as applicable. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.2 FABRIC
4、 CONSTRUCTION 3.2.1 Fabric Count, +/- 10% tolerance (ASTM D 3887) Wales 95 wales/10 cm Courses 160 courses/10 cm 3.2.2 Fabric Weight, +/- 15% tolerance 310 g/m2(FLTM BN 106-01) 3.3 COMPOSITION (ASTM D 629) Fabric 100% polyester 3.4 YARN CONSTRUCTION (ASTM D 1244) Ground 220 dtex f64 (polyester, text
5、urized, dope dyed) Pile 167dtex f48 (polyester, texturized, semi-dull) ENGINEERING MATERIAL SPECIFICATIONWSS-M1H996-A Printed copies are uncontrolled Copyright 2006, Ford Global Technologies, LLC Page 2 of 2 3.5 METHOD OF DYEING Yarn dyed or as approved by Materials Engineering 3.6 FINISHING OPERATI
6、ONS As approved by Materials Engineering 4. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. 4.1 Purchase departments will ensure that both materials defined in this specification and shipped to any one assembly plant will be produced by one supplier only.
