1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2003 07 11 Activated M. Dumitrescu Printed copies are uncontrolled Copyright 2003, Ford Global Technologies, Inc. Page 1 of 1 CORD, PIPING, WOVEN POLYESTER WSS-M6H45-A 1. SCOPE The material defined by this specification is a woven polyester fa
2、bric with breaded polyester thread filler, and decorated with 4 ends reflective material, 2 ends on each side. 2. APPLICATION This specification was released originally for material used as a decorative item on upper bolster of the seat cover for 2004 P150 MAZDA. 3. REQUIREMENTS In addition to the r
3、equirements listed herein, the piping material shall meet requirements of Seat SDS. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.2 CONSTRUCTION Flat woven fabri
4、c with braided thread filler, and decorated with 4 ends reflective material, 2 ends on each side. 3.2.1 Width, mm 15.8 +/-1.6 3.2.2 Weight, g/m 216 +/- 11 3.2.3 Woven Count, +/- 5% tolerance (ASTM D 3775) Warp 65 ends 16.7 tex (polyester) X 2 Filler 2 ends 3.2 mm (braided polyester) Reflective material 4 ends 1.1 mm 3.3 COMPOSITION (ASTM D 629) Fabric 100% Polyester 3.4 METHOD OF DYEING Yarn Dye
