GOST 16865-1979 X-ray apparatus for structural and spectral analyses Terms and definitions《X射线结构和光谱分析装置 术语和定义》.pdf

相关资源

JIS G1258-2-2007 铁及钢—ICP发光光谱分析方法—第2部：锰、镍、铬、钼、铜、钨、钒、钴、钛及铌定量方法—硫酸磷酸分解法.pdf

JIS K0119-1997 X射线萤光光谱分析方法通则.pdf

JIS C6192-2008 光谱分析仪的校准.pdf

JIS C6122-5-1-2001 光纤放大器.试验方法.第5-1部分反射参数试验方法.光谱分析仪试验方法.pdf

JIS G1256-1997 钢铁的X射线荧光光谱分析法 Iron and steel -- Method for X-ray fluorescence spectrometric analysis.pdf

JIS G1257-1994 钢铁.原子吸收光谱分析方法 Iron and steel -- Methods for atomic absorption spectrometric analysis.pdf

HB 5219.13-1998 镁合金化学分析方法原子吸收光谱分析法测定锌含量.pdf

DL T 991-2006 电力设备金属光谱分析技术导则.pdf

HB 5219.11-1998 镁合金化学分析方法原子吸收光谱分析法测定镍含量.pdf

HB 5219.3-1998 镁合金化学分析方法原子吸收光谱分析法测定铜含量.pdf

猜你喜欢

FORD WSS-M4D556-A8-2011 POLYPROPYLENE (PP) COPOLYMER 22% MINERAL FILLED MOLDING COMPOUND EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《聚丙烯(PP)共聚物 外部22%矿物填充模塑材料 与福特WSS-M99P1111-A.pdf

FORD WSS-M4D556-B8-2017 POLYPROPYLENE (PP) COPOLYMER 22% MINERAL FILLED MOLDING COMPOUND EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D578-A2-2011 POLYAMIDE (PA) 6 HEAT STABILIZED IMPACT MODIFIED 35% GLASS REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《热稳定冲击改良的35%玻璃加强聚酰胺(PA)6模塑材料 与.pdf

FORD WSS-M4D578-B1-2013 POLYAMIDE (PA) 6 HEAT STABILIZED IMPACT MODIFIED 35% GLASS REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D579-A2-2007 POLYVINYL CHLORIDE (PVC) OLEFIN MODIFIED - RIGID - HIGH HEAT - EXTRUSION GRADE TO BE USED WITH FORD WSS-M99P1111-A 《挤塑级耐高温刚性烯烃改性聚氯乙烯(PVC) 与标准FORD WSS-M99.pdf

FORD WSS-M4D582-A2-2011 POLYBUTYLENE TEREPHTHALATE (PBT) POLYETHYLENE TEREPHTHALATE HEAT STABILIZED 50% GLASS FIBER REINFORCED TO BE USED WITH FORD WSS-M99P1111-A 《热稳定50%玻璃纤维增强聚丁.pdf

FORD WSS-M4D585-B-2011 ABS POLYCARBONATE BLEND (ABS + PC) IMPACT MODIFIED TO BE USED WITH FORD WSS-M99P1111-A 《冲击改良的丙烯腈 聚碳酸酯混合物(ABS + PC) 与福特WSS-M99P1111-A 一起使用[使用 福特WSS-M4D585.pdf

FORD WSS-M4D585-C1-2013 POLYCARBONATE ACRYLONITRILE BUTADIENE STYRENE BLEND (PC+ABS) HIGH IMPACT MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D585-C1-2017 POLYCARBONATE ACRYLONITRILE BUTADIENE STYRENE BLEND (PC+ABS) HIGH IMPACT MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A .pdf