GOST 19960-1974 Cylinder matrices-blanks for wax-pattern dies Design and dimensions《熔模用压模圆柱形下模坯 结构及尺寸》.pdf

相关资源

GOST 19950-1974 Bushes for wax-pattern dies Design and dimensions《熔模用压模衬套 结构及尺寸》.pdf

GOST 19951-1974 Guide columns for wax-pattern dies Design and dimensions《熔模用压模导向柱 结构及尺寸》.pdf

GOST 19952-1974 Guide bush for wax-pattern dies Design and dimensions《熔模用压模导管 结构及尺寸》.pdf

GOST 19958-1974 Cylinder ejectors for wax-pattern dies Design and dimensions《熔模用压模圆柱形顶出器 结构及尺寸》.pdf

GOST 19966-1974 Support plate for wax-pattern dies with rectangular matrices Design and dimensions《带矩形下模的熔模用压模支承板 结构及尺寸》.pdf

GOST 19972-1974 Stationary retainer rings for wax-pattern dies with rectangular matrices Design and dimensions《带矩形下模的熔模用压模固定套 结构及尺寸》.pdf

GOST 19984-1974 Base-blank for wax-pattern dies with rectangular matrices Design and dimensions《带矩形下模的熔模用压模底座坯料 结构及尺寸》.pdf

GOST 19998-1974 Pipe union for wax-pattern dies Design and dimensions《熔模用压模管接头 结构及尺寸》.pdf

GOST 19999-1974 Wax-pattern dies Specifications《熔模用压模夹具及零件 技术要求》.pdf

猜你喜欢

ASTM D6504-2011(2016)e1 9424 Standard Practice for On-Line Determination of Cation Conductivity in High Purity Water《在线检测高纯度水中阳离子导电性的标准实施规程》.pdf

ASTM D6505-2000(2006) Standard Test Method for Assay of normal-Propyl Bromide Content《检定丙基溴含量的标准试验方法》.pdf

ASTM D6505-2000(2012) 6875 Standard Test Method for Assay of normal-Propyl Bromide Content《检定正丙基溴含量的标准试验方法》.pdf

ASTM D6505-2000(2017) 9375 Standard Test Method for Assay of normal-Propyl Bromide Content《检定正丙基溴含量的标准试验方法》.pdf

ASTM D6506 D6506M-2001(2018)e1 5625 Standard Specification for Asphalt Based Protection Board for Below-Grade Waterproofing《低等级防水用沥青基防护板标准规范》.pdf

ASTM D6506-2001 Standard Specification for Asphalt Based Protection for Below-Grade Waterproofing《地下防水用沥青层保护的标准规范》.pdf

ASTM D6506-2001(2009) 402 Standard Specification for Asphalt Based Protection for Below-Grade Waterproofing《地下防水用沥青层保护的标准规范》.pdf

ASTM D6507-2000(2005) Standard Practice for Fiber Reinforcement Orientation Codes for Composite Materials《复合材料用纤维增强定向规则的标准实施规程》.pdf

ASTM D6507-2011 red 3037 Standard Practice for Fiber Reinforcement Orientation Codes for Composite Materials《复合材料纤维增强定向编码标准操作规程》.pdf