GOST 19984-1974 Base-blank for wax-pattern dies with rectangular matrices Design and dimensions《带矩形下模的熔模用压模底座坯料 结构及尺寸》.pdf

相关资源

GOST 19950-1974 Bushes for wax-pattern dies Design and dimensions《熔模用压模衬套 结构及尺寸》.pdf

GOST 19951-1974 Guide columns for wax-pattern dies Design and dimensions《熔模用压模导向柱 结构及尺寸》.pdf

GOST 19952-1974 Guide bush for wax-pattern dies Design and dimensions《熔模用压模导管 结构及尺寸》.pdf

GOST 19958-1974 Cylinder ejectors for wax-pattern dies Design and dimensions《熔模用压模圆柱形顶出器 结构及尺寸》.pdf

GOST 19960-1974 Cylinder matrices-blanks for wax-pattern dies Design and dimensions《熔模用压模圆柱形下模坯 结构及尺寸》.pdf

GOST 19966-1974 Support plate for wax-pattern dies with rectangular matrices Design and dimensions《带矩形下模的熔模用压模支承板 结构及尺寸》.pdf

GOST 19972-1974 Stationary retainer rings for wax-pattern dies with rectangular matrices Design and dimensions《带矩形下模的熔模用压模固定套 结构及尺寸》.pdf

GOST 19998-1974 Pipe union for wax-pattern dies Design and dimensions《熔模用压模管接头 结构及尺寸》.pdf

GOST 19999-1974 Wax-pattern dies Specifications《熔模用压模夹具及零件 技术要求》.pdf

猜你喜欢

GOST 17774-1972 Pins locating cylindrical high Design《高级筒形定位销 设计》.pdf

GOST 17775-1972 Pins locating cut high Design《高级切割定位销 设计》.pdf

GOST 17776-1972 Rest plates for locating pins Design《定位销轴用固定板 结构》.pdf

GOST 17777-1972 Washers bearing for locating pins Design《定位销垫圈 设计》.pdf

GOST 17778-1972 Washers bearing Design《支承垫圈 结构》.pdf

GOST 17779-1972 Handles fixed Design《固定把手 结构》.pdf

GOST 17783-1972 The hooks for insulators of electrotransmission airial line voltage up to 1000 V communication airial line and radio network《电压为1000V的电力传输架空线路 通讯架空线路和无线电网络绝缘子用吊钩》.pdf

GOST 17789-1972 Petroleum bitumens Method for determination of paraffin content《石油沥青 石蜡含量的测定方法》.pdf

GOST 17791-1982 Cahtode-ray devices Terms and definitions《电子束器件 术语和定义》.pdf