GOST 19950-1974 Bushes for wax-pattern dies Design and dimensions《熔模用压模衬套 结构及尺寸》.pdf

相关资源

GOST 19951-1974 Guide columns for wax-pattern dies Design and dimensions《熔模用压模导向柱 结构及尺寸》.pdf

GOST 19952-1974 Guide bush for wax-pattern dies Design and dimensions《熔模用压模导管 结构及尺寸》.pdf

GOST 19958-1974 Cylinder ejectors for wax-pattern dies Design and dimensions《熔模用压模圆柱形顶出器 结构及尺寸》.pdf

GOST 19960-1974 Cylinder matrices-blanks for wax-pattern dies Design and dimensions《熔模用压模圆柱形下模坯 结构及尺寸》.pdf

GOST 19966-1974 Support plate for wax-pattern dies with rectangular matrices Design and dimensions《带矩形下模的熔模用压模支承板 结构及尺寸》.pdf

GOST 19972-1974 Stationary retainer rings for wax-pattern dies with rectangular matrices Design and dimensions《带矩形下模的熔模用压模固定套 结构及尺寸》.pdf

GOST 19984-1974 Base-blank for wax-pattern dies with rectangular matrices Design and dimensions《带矩形下模的熔模用压模底座坯料 结构及尺寸》.pdf

GOST 19998-1974 Pipe union for wax-pattern dies Design and dimensions《熔模用压模管接头 结构及尺寸》.pdf

GOST 19999-1974 Wax-pattern dies Specifications《熔模用压模夹具及零件 技术要求》.pdf

猜你喜欢

EN ISO 20339-2017 en Non-destructive testing - Equipment for eddy current examination - Array probe characteristics and verification《涡流检测探头阵列特征和验证无损检测设备(ISO 20339 2017)》.pdf

EN ISO 20344-2011 en Personal protective equipment - Test methods for footwear《个人防护装备 鞋靴的试验方法》.pdf

EN ISO 20345-2011 en Personal protective equipment - Safety footwear《个人防护设备 安全鞋》.pdf

EN ISO 20346-2014 en Personal protective equipment - Protective footwear《个人防护设备 防护鞋靴(ISO 20346 2014)》.pdf

EN ISO 20347-2012 en Personal protective equipment - Occupational footwear《个人防护设备 职业鞋靴》.pdf

EN ISO 20349-1-2017 en Personal protective equipment - Footwear protecting against risks in foundries and welding - Part 1 Requirements and test methods for protection against risk.pdf

EN ISO 20349-2-2017 en Personal protective equipment - Footwear protecting against risks in foundries and welding - Part 2 Requirements and test methods for protection against risk.pdf

EN ISO 20349-2010 en Personal protective equipment - Footwear protecting against thermal risks and molten metal splashes as found in foundries and welding - Requirements and test m.pdf

EN ISO 20361-2015 en Liquid pumps and pump units - Noise test code - Grades 2 and 3 of accuracy《液体泵和泵机组 噪声测试规范 2级和3级精度（ISO 20361 2015）》.pdf