GOST 24173-1980 Thyristors Essential parameters《晶闸管 基本参数》.pdf

相关资源

JB T 11047.1-2010 脱硫包 第1部分 基本参数.pdf

JB T 11813.1-2014 纵剪机 第1 部分：型式和基本参数.pdf

JB T 3356-1992 低温液体容器 基本参数.pdf

JB T 6391.1-1992 起重机滑接输电装置 型式和基本参数.pdf

MT 330-1993 XG.XC系列 立井大型多绳箕斗卸载设备基本参数.pdf

MT 331-1993 JL系列 立井大型多绳箕斗基本参数.pdf

GB T 5170.20-2005 电工电子产品环境试验设备 基本参数检定方法 水试验设备.pdf

GB T 5170.21-2008 电工电子产品环境试验设备基本参数检验方法 振动(随机)试验用液压振动台.pdf

GB T 5170.5-1996 电工电子产品环境试验设备基本参数检定方法 湿热试验设备.pdf

CB- 3180-1983 船用离心式泥泵型式与基本参数.pdf

猜你喜欢

DIN 51784-1983 Testing of liquid fuels determination of content of lubricating oils of lubricated petrol on the determination of test gum content in hydrocarbons by jet evaporation.pdf

DIN 51790-4-2011 de 9467 Testing of liquid fuels - Determination of the vanadium and nickel content - Part 4 Determination by atomic absorption spectrometry (AAS) or by optical emi.pdf

DIN 51790-7-2002 Testing of liquid fuels - Determination of the vanadium and nickel content - Part 7 Analysis by wavelength dispersive X-ray spectrometry (XRS) and Fundamental-Para.pdf

DIN 51794-2003 Testing of mineral oil hydrocarbons - Determination of ignition temperature《矿物油碳氢化合物检测 点火温度测定》.pdf

DIN 51796-2010 Testing of liquid mineral hydrocarbons - Determination of mercaptan sulfur content - Potentiometric method《液体矿物碳氢化合物检验 硫醇硫含量的测定 电势法》.pdf

DIN 51797-3-1973 Testing of liquid fuels determination of the sodium content determination by atomic absorption spectroscopy after incineration《液体燃料检验 第3部分 钠含量测定 焚化后用原子吸收光谱法测定》.pdf

DIN 51802-1990 Testing lubricating greases for their corrosion-inhibiting properties by the SKF Emcor method《润滑脂的试验 用SKF－Emcor方法进行润滑脂防腐性能试验 》.pdf

DIN 51805-1974 Testing of lubricants determination of flow pressure of lubricating greases Kesternich method《润滑剂试验 润滑脂流动压力的测定 耐蚀试验（Kesternich ）法》.pdf

DIN 51805-2-2016 Testing of lubricants - Determination of flow pressure of lubricating greases according to Kesternich method - Part 2 Automatic method《润滑剂试验 采用Kesternich法测定润滑脂的流动压.pdf