1、A.C.N. 006 893 232Holden LimitedEngineering DepartmentMATERIAL SPECIFICATIONNUMBERSHEETRELEASEREVISION:HN 15931 of 2April, 1985NAME: SEALER - ANAEROBIC TYPE - HIGH TEMPERATURE RESISTANTTHIS DOCUMENT MUST NOT BE REPRODUCED. IF USED IN RELATION TOTHE COMPANYS PRODUCTS THE RECIPIENT IS RESPONSIBLE TOCO
2、NFIRM THE DOCUMENT ISSUE DATE IS STILL VALID.FORM : I:LABRTORYFORMSTDMATSPEC.DOC1. Description:This standard describes a single component, gel-like anerobic material intendedfor use in place of preformed and precut gaskets. The material solidifies bypolymerization into a tough plastic when confined
3、between closely fitted metalsurfaces, producing an effective seal against leakage. The material issuitable for temperatures up to 200C and pressures up to 31MPa.2. General:The material shall be capable of sealing gaps up to 0.5mm. and shall notmigrate or drip when used on vertical surfaces.3. Proper
4、ties:3.1 Resin Type - Polyacrylate.3.2 Colour - Red.3.3 Shelf life at 25 - 12 months minimum.3.4 Temperature rangeContinuous operation.- 57 C. to 200 c.3.5 Viscosity at 22 C(Brookfield Viscometer 5RPM)-700,000 to 1,200,000 CPS.3.6 Cure speed -4 hours.4. Approval ) Refer clauses A,B,C and GCertificat
5、ion ) HN 1000Inspection & Rejection )COPYRIGHT HOLDEN HoldenLicensed by Information Handling ServicesA.C.N. 006 893 232Holden LimitedEngineering DepartmentMATERIAL SPECIFICATIONNUMBERSHEETRELEASEREVISION:HN 15932 of 2April, 1985NAME: SEALER - ANAEROBIC TYPE - HIGH TEMPERATURE RESISTANTTHIS DOCUMENT
6、MUST NOT BE REPRODUCED. IF USED IN RELATION TOTHE COMPANYS PRODUCTS THE RECIPIENT IS RESPONSIBLE TOCONFIRM THE DOCUMENT ISSUE DATE IS STILL VALID.FORM : I:LABRTORYFORMSTDMATSPEC.DOCAPPROVED SUPPLIERS AND MATERIALS SHEETAPPROVED MATERIAL APPROVED SUPPLIERLoctite 510 Loctite AustraliaCOPYRIGHT HOLDEN HoldenLicensed by Information Handling Services
