1、A.C.N. 006 893 232Holden LimitedEngineering DepartmentMATERIAL SPECIFICATIONNUMBERSHEETRELEASEREVISION:HN 21851 of 2June, 1995July, 2000NAME: ADHESIVE - HOT MELT - HEAT RESISTANCETHIS DOCUMENT MUST NOT BE REPRODUCED. IF USED IN RELATIONTO THE COMPANYS PRODUCTS THE RECIPIENT IS RESPONSIBLE TOCONFIRM
2、THE DOCUMENT ISSUE DATE IS STILL VALID.FORM : I:LABRTORYFORMSTDMATSPEC.DOC1. SCOPEThe material described in this specification is a hot melt adhesive with a highersoftening point than the adhesive in HN 1987. It has good adhesion to plasticmaterials such as ABS and painted metal surfaces.It must hav
3、e sufficient tack to adhere to painted surfaces at 18C minimum.2. PROPERTIES2.1 Specific Gravity1.0 0.12.2 Softening Point (Ring and Ball) 120 min.2.3 Adhesive - Peel 180C 1000 N/m.ABS/Painted Metal.2.4 Adhesion - ShearABS/Painted Metal )Assembly must supportTest Method: Apply adhesive to painted )a
4、 1 kg wt. for 24 hrspanel and overlap ABS (400 sq. mm.) )at 50C.to form a shear assembly. Allow to cool.Hang a 1 kg wt to one end and placein an oven at 50C.3. APPROVAL, INSPECTION AND REJECTIONRefer HN 1000 , Clauses A and C.4. HAZARDOUS MATERIALSRefer HN 1000, Clause H.5. RESTRICTED CHEMICALSRefer
5、 HN 1000, Clause J.A.C.N. 006 893 232Holden LimitedEngineering DepartmentMATERIAL SPECIFICATIONNUMBERSHEETRELEASEREVISION:HN 21852 of 2June, 1995July, 2000NAME: ADHESIVE - HOT MELT - HEAT RESISTANCETHIS DOCUMENT MUST NOT BE REPRODUCED. IF USED IN RELATIONTO THE COMPANYS PRODUCTS THE RECIPIENT IS RES
6、PONSIBLE TOCONFIRM THE DOCUMENT ISSUE DATE IS STILL VALID.FORM : I:LABRTORYFORMSTDMATSPEC.DOC6. APPROVED SUPPLIERS AND MATERIALSAPPROVED SUPPLIER APPROVED MATERIALNational Starch Durotak H203/A7. REFERENCESHN 1987 HN 10008. REVISIONSJuly, 2000 -Section 3, expanded into sections 3, 4 and 5.-Editorial and Formatting corrections.-References section added.
