INTA 12 38 20 《轻合金锻造铝的铝，锰，镁 1，2》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

EN ISO 6579-1-2017 en Microbiology of the food chain - Horizontal method for the detection enumeration and serotyping of Salmonella - Part 1 Detection of Salmonella spp 《食物链的微生物学检测.pdf

EN ISO 658-2002 en Oilseeds - Determination of Content of Impurities《油料种子 杂质含量的测定ISO 658-2002》.pdf

EN ISO 6581-2010 en Anodizing of aluminium and its alloys - Determination of the comparative fastness to ultraviolet light and heat of coloured anodic oxidation coatings《铝及铝合金的阳极化处.pdf

EN ISO 659-2009 en Oilseeds - Determination of oil content (Reference method)《油料种子 油含量的测定(参考方式)》.pdf

EN ISO 660-2009 en Animal and vegetable fats and oils - Determination of acid value and acidity《动植物脂肪和油 酸值和酸度的测定》.pdf

EN ISO 6603-1-2000 en Plastics - Determination of Puncture Impact Behaviour of Rigid Plastics - Part 1 Non-Instrumented Impact Testing《塑料 硬质塑料耐冲击性能的测定 第1部分 非仪器操作的冲击试验 ISO 6603-1-20.pdf

EN ISO 6603-2-2000 en Plastics - Determination of Puncture Impact Behaviour of Rigid Plastics - Part 2 Instrumented Puncture Test (Incorporating Corrigendum October 2000)《塑料 硬质塑料复合.pdf

EN ISO 661-2005 en Animal and vegetable fats and oils - Preparation of test sample (Incorporating corrigendum November 2006)《动物和植物的脂肪和油 试样的制备 结合技术勘误2006-11》.pdf

EN ISO 662-2016 en Animal and vegetable fats and oils - Determination of moisture and volatile matter content《动植物油脂水分和挥发物含量的测定(ISO 662 2016)》.pdf