IRAM 2002-N P -1948 《电力用退火铜样本》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSB-M4D815-A1-2006 POLYPROPYLENE (PP) FOAM CLOSED CELL LOW DENSITY TO BE USED WITH FORD WSS-M99P1111-A 《低密度闭孔聚丙烯（PP）泡沫 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSB-M4D815-A2-2006 POLYPROPYLENE (PP) FOAM CLOSED CELL MEDIUM DENSITY TO BE USED WITH FORD WSS-M99P1111-A (Shown on WSB-M4D815-A1)《中等密度闭孔聚丙烯(PP)泡沫 与标准FORD WSS-M99P1111-A一起使.pdf

FORD WSB-M4D815-A3-2006 POLYPROPYLENE (PP) FOAM CLOSED CELL HIGH DENSITY TO BE USED WITH FORD WSS-M99P1111-A (Shown on WSB-M4D815-A1)《高密度闭孔聚丙烯(PP)泡沫 与标准FORD WSS-M99P1111-A一起使用 .pdf

FORD WSB-M4D816-A-2008 POLYCARBONATE + ABS BLEND (PC+ABS) MEDIUM IMPACT VERY HIGH HEAT MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《聚碳酸酯+ABS共混物(PC+ABS)中冲击强度 甚高热模塑料(和FORD.pdf

FORD WSB-M4D816-A2-2008 POLYCARBONATE + ABS BLEND (PC+ABS) MEDIUM IMPACT HIGH HEAT MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《中等抗冲、耐高温丙烯腈-丁二烯-苯乙烯共聚物(ABS) 聚碳酸酯混合物(ABS+P.pdf

FORD WSB-M4D818-A2-2010 POLYPROPYLENE (PP) SHEET 40% LONG GLASS FIBER REINFORCED TO BE USED WITH FORD WSS-M99P1111-A 《40%长玻璃纤维增强的聚丙烯（PP）平布 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSB-M4D821-A-2006 ACETAL (POM) COPOLYMER 25 % GLASS BEAD FILLED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《25%玻璃珠填充的乙缩醛共聚物（POM）成型料 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSB-M4D824-A-2010 POLYPHENYLENE ETHER + POLYSTYRENE BLEND (PPE+PS) FOAM RIGID TO BE USED WITH FORD WSS-M99P1111-A 《刚性聚苯醚+聚苯乙烯（PPE+PS）泡沫 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSB-M4D825-A-2010 POLYPROPYLENE (PP) COPOLYMER 7% MINERAL FILLED COLOR PIGMENTED LOW GLOSS MOLDING COMPOUND INTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《汽车内部用低光泽、着色型7%矿物填充的.pdf