IRAM 2104-1950 《电流传导及分流用变压器及调节变压器》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD ESB-M4D489-A3-2010 STYRENE MALEIC ANHYDRIDE (SMA) COPOLYMER RUBBER MODIFIED TO BE USED WITH FORD WSS-M99P1111-A 《橡胶改性的苯乙烯马来酐三元共聚物（SMA） 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD ESB-M4D492-A1-2007 THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO) MINERAL FILLER COLOR PIGMENTED PAINTED APPLICATIONS ONLY TO BE USED WITH FORD WSS-M99P1111-A 《仅用于油漆用途的着色型矿物填充热塑性聚.pdf

FORD ESB-M4D492-A2-2007 THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO) MINERAL GLASS ESB-M4D492-A2 FIBER FILLER COLOR PIGMENTED PAINTED APPLICATIONS ONLY TO BE USED WITH FORD WSS-M99P11.pdf

FORD ESB-M4D492-A3-2007 THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO) HIGH MINERAL FILLER CONTENT - COLOR PIGMENTED - PAINTED APPLICATIONS ONLY TO BE USED WITH FORD WSS-M99P1111-A 《仅用.pdf

FORD ESB-M4D492-A4-2006 THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO) MINERAL FILLER - COLOR PIGMENTED - HIGHER MOLD SHRINKAGE - PAINTED APPLICATIONS ONLY TO BE USED WITH FORD WSS-M99P.pdf

FORD ESB-M4D500-A-2006 POLYPROPYLENE (PP) COPOLYMER MEDIUM IMPACT COLOR PIGMENTED LOW GLOSS INTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《车内用低光泽着色型中等抗冲聚丙烯(PP)共聚物 与标准FORD WSS-M99.pdf

FORD ESB-M4D524-A-2010 ETHYLENE VINYL ACETATE COPOLYMER TO BE USED WITH FORD WSS-M99P1111-A 《乙烯-乙酸乙烯共聚物 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD ESB-M4D529-A-2010 POLYETHER BLOCK AMIDE (PEBA) THERMOPLASTIC ELASTOMER MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《聚醚嵌段酰胺热塑性弹性体成型料 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD ESB-M4D537-A-2010 POLYPHENYLENE ETHER (PPE) MODIFIED MOLDING COMPOUND PAINTABLE TO BE USED WITH FORD WSS-M99P1111-A 《可印刷聚苯醚（PPE）改性成型料 与标准FORD WSS-M99P1111-A一起使用 》.pdf