IRAM 2504 N I O -1958 《系列10所用的钢阀门以及法兰连接部件的尺寸》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST 2533-1988 Gauges for staight pipe thread Tolerances《直管螺纹的量规 公差》.pdf

GOST 2534-1977 Height and depth limit gauges Tolerances《隔板高度和深度极限量规 公差》.pdf

GOST 255-1990 Ebonite Determination of cross-breaking strength《硬橡胶 弯曲强度极限测定法》.pdf

GOST 2566-1979 Shoots of anabasis leafless Specifications《无叶猬藜 技术条件》.pdf

GOST 2567-1989 Technical hydrofluoric acid Specifications《工业用氟氢酸 技术条件》.pdf

GOST 2568-1971 Currugat and inclination angles of blades and slots of cutting tools Sizes《切割工具的刀片和刀槽的波纹倾角 尺寸规格》.pdf

GOST 2571-1971 Centre lathe chucks Desing and dimensions《车床拔盘 结构及尺寸》.pdf

GOST 2575-1979 Thrust centres with nut screwed-off nut Design《螺母旋下的推力中心 设计》.pdf

GOST 2576-1979 Thrust semicentres Desing《支承用半顶尖 结构及尺寸》.pdf