IRAM 5083-1956 《钢制机械锯锯片》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSS-M4D550-A7-2010 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) MINERAL FILLED HIGH IMPACT MOLDING COMPOUND PAINTABLE OR MOLDED-IN COLOR TO BE USED WITH FORD WSS-M99P1111-A 《可印刷.pdf

FORD WSS-M4D550-A8-2010 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) MINERAL FILLED HIGH IMPACT MOLDING COMPOUND PAINTABLE OR MOLDED-IN COLOR TO BE USED WITH FORD WSS-M99P1111-A 《可印刷.pdf

FORD WSS-M4D550-A9-2010 THERMOPLASTIC POLYOLEFIN ELASTOMER (TE0) 22% MINERAL FILLED MEDIUM IMPACT MOLDING COMPOUND MOLDED-IN-COLOR INTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《汽.pdf

FORD WSS-M4D550-B-2015 THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO) 25% MINERAL FILLED MEDIUM HIGH IMPACT HIGH SCRATCH RESISTANT MOLDING COMPOUND INTERIOR TO BE USED WITH FORD WSS-M99.pdf

FORD WSS-M4D556-A6-2010 POLYPROPYLENE COPOLYMER 22 % MINERAL FILLED EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《汽车外部用22%矿物填充的聚丙烯（PP）共聚物 与标准FORD WSS-M99P1111-A一起使用 ［使用 FORD WS.pdf

FORD WSS-M4D556-A7-2006 POLYPROPYLENE PHOSPHORESCENT PIGMENT FILLED INTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《汽车内部用发磷光颜料填充的聚丙烯（PP） 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSS-M4D556-A8-2011 POLYPROPYLENE (PP) COPOLYMER 22% MINERAL FILLED MOLDING COMPOUND EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《聚丙烯(PP)共聚物 外部22%矿物填充模塑材料 与福特WSS-M99P1111-A.pdf

FORD WSS-M4D556-B8-2017 POLYPROPYLENE (PP) COPOLYMER 22% MINERAL FILLED MOLDING COMPOUND EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D578-A2-2011 POLYAMIDE (PA) 6 HEAT STABILIZED IMPACT MODIFIED 35% GLASS REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《热稳定冲击改良的35%玻璃加强聚酰胺(PA)6模塑材料 与.pdf