IS 13342-1992 Dimensions of magnetic oxide cores intended for use in power supply applications.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DIN ISO 8975-1992 Plastics phenolic resins determination of pH identical with ISO 8975 1989《塑料 酚醛树脂 pH值的测定》.pdf

DIN ISO 8976-2006 Pliers and nippers - Multiple slip joint pliers - Dimensions and test values (ISO 8976 2004) English version of DIN ISO 8976 2006-09《夹扭钳和剪切钳 多滑动接合式手钳 尺寸和试验值》.pdf

DIN ISO 8977-2003 Tools for pressing - Matrixes (ISO 8977 2003)《冲压工具 冲模》.pdf

DIN ISO 8979-2006 Pliers and nippers for electronics - Nomenclature (ISO 8979 2004)《电讯夹扭钳和剪切钳 术语表（ISO 8979 2004）》.pdf

DIN ISO 8984-1-1994 Diesel engines - Testing of fuel injectors - Part 1 Hand-lever-operated testing and setting apparatus identical with ISO 8984-1 1993《柴油发动机 燃油喷咀的检验 第1部分 手操作检验和调整.pdf

DIN ISO 8984-2-1994 Diesel engines - Testing of fuel injectors - Part 2 Test methods identical with ISO 8984-2 1993《柴油发动机 燃油喷咀的检验 第2部分 试验方法 等同采用 ISO 8984-2 1993》.pdf

DIN ISO 8992-2005 Fasteners - General requirements for bolts screws studs and nuts (ISO 8992 2005)《紧固件 螺栓、螺钉、螺柱和螺母的一般要求》.pdf

DIN ISO 9022-1-2016 Optics and photonics - Environmental test methods - Part 1 Definitions extent of testing (ISO 9022-1 2016)《光学和光子学 环境试验方法 第1部分 定义 试验程度(ISO 9022-1-2016)》.pdf

DIN ISO 9022-11-2016 Optics and photonics - Environmental test methods - Part 11 Mould growth (ISO 9022-11 2015)《光学和光子学 环境试验方法 第11部分 霉菌生长(ISO 9022-11-2015)》.pdf