IS 13606-1993 Synthetic sulphochlorinated fatliquors for leather processing Specification.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

BS EN ISO 10319-2015 Geosynthetics Wide-width tensile test《土工合成材料 宽幅拉伸试验》.pdf

BS EN ISO 10320-1999 Geotextiles and geotextile-related products - Identification on site《土工织物和土工织物相关产品 现场识别》.pdf

BS EN ISO 10322-1-2016 Ophthalmic optics Semi-finished spectacle lens blanks Specifications for single-vision and multifocal lens blanks《眼科光学 半成品透镜坯 单光透镜毛坯和多焦透镜坯规范》.pdf

BS EN ISO 10322-2-2016 Ophthalmic optics Semi-finished spectacle lens blanks Specifications for progressive-power and degressive-power lens blanks《眼科光学 半成品眼镜片毛坯 渐进式动力和递减式动力眼镜毛坯规格》.pdf

BS EN ISO 10323-2013 Dentistry Bore diameters for rotary instruments such as discs and wheels《牙科 旋转器械切盘和轮的内径》.pdf

BS EN ISO 10325-2009 Fibre ropes - High modulus polyethylene - 8-strand braided ropes 12-strand braided ropes and covered ropes《纤维绳索 高模量聚乙烯 8股编织绳索、12股编织绳索以及覆盖绳索》.pdf

BS EN ISO 10326-1-2016 Mechanical vibration Laboratory method for evaluating vehicle seat vibration Basic requirements《机械振动 车座振动评估用实验室方法 基本要求》.pdf

BS EN ISO 10328-2016 Prosthetics Structural testing of lower-limb prostheses Requirements and test methods《修复术 假腿的结构试验 要求和试验报告》.pdf

BS EN ISO 10341-2012 Ophthalmic instruments Refractor heads《眼科仪器 折射仪机头》.pdf