ITU-R QUESTION 2447-2006 Interference between standard frequency and time signal services operating between 20 and 90 kHz《20到90千赫之间的标准频率和时间信号服务之间的干扰》.pdf

上传人:terrorscript155 文档编号:792488 上传时间:2019-02-02 格式:PDF 页数:1 大小:13.10KB
下载 相关 举报
ITU-R QUESTION 2447-2006 Interference between standard frequency and time signal services operating between 20 and 90 kHz《20到90千赫之间的标准频率和时间信号服务之间的干扰》.pdf_第1页
第1页 / 共1页
亲,该文档总共1页,全部预览完了,如果喜欢就下载吧!
资源描述

1、QUESTION ITU-R 244/7*,*Interference between standard frequency and time signal services operating between 20 and 90 kHz (2006) The ITU Radiocommunication Assembly, considering a) that the number of standard frequency and time signal (SFTS) radio broadcast services operating between 20 and 90 kHz are

2、 increasing; b) that many existing services have increased or plan to increase radiated power; c) that stations produce significant signal levels in areas served by other stations at identical frequencies; d) that definitions for interference between stations are not well developed given their uniqu

3、e application for measuring epoch and phase of carrier; e) that methods of measurement of signal strength and standard instrumentation to do so are not well developed or widely available; f) that required algorithms/software for propagation calculations are not readily available, decides that the fo

4、llowing Question should be studied 1 What are the definitions for interference between stations and what are their service areas? 2 What algorithms are available/required for calculation of signal propagation and prediction of signal strength and signal-to-noise ratio (SNR)? 3 What standard signal s

5、trength and SNR measurement procedures should be used and what instrumentation is available/necessary to perform these measurements? 4 What standard procedures should be used to measure radiated power? 5 What methods can be used to limit interference? further decides 1 that the results of the above

6、studies should be included in (a) Recommendation(s); 2 that the above studies should be completed by 2011. Category: S2 _ *In the year 2009, Radiocommunication Study Group 7 extended the completion date of studies for this Question. *This Question should be brought to the attention of Radiocommunication Working Party 1C.

展开阅读全文
相关资源
猜你喜欢
  • ASTM D2420-2012a Standard Test Method for Hydrogen Sulfide in Liquefied Petroleum (LP) Gases (Lead Acetate Method)《液化石油(LP)气中硫化氢的标准试验方法(醋酸铅法)》.pdf ASTM D2420-2012a Standard Test Method for Hydrogen Sulfide in Liquefied Petroleum (LP) Gases (Lead Acetate Method)《液化石油(LP)气中硫化氢的标准试验方法(醋酸铅法)》.pdf
  • ASTM D2420-2013 Standard Test Method for Hydrogen Sulfide in Liquefied Petroleum (LP) Gases (Lead Acetate Method)《液化石油(LP)气中硫化氢的标准试验方法(醋酸铅法)》.pdf ASTM D2420-2013 Standard Test Method for Hydrogen Sulfide in Liquefied Petroleum (LP) Gases (Lead Acetate Method)《液化石油(LP)气中硫化氢的标准试验方法(醋酸铅法)》.pdf
  • ASTM D2420-2013(2018) Standard Test Method for Hydrogen Sulfide in Liquefied Petroleum (LP) Gases (Lead Acetate Method).pdf ASTM D2420-2013(2018) Standard Test Method for Hydrogen Sulfide in Liquefied Petroleum (LP) Gases (Lead Acetate Method).pdf
  • ASTM D2421-2002(2007) Standard Practice for Interconversion of Analysis of C5 and Lighter Hydrocarbons to Gas-Volume Liquid-Volume or Mass Basis《C5和轻质烃类气体体积、液体体积或重量基准的分析互变现象用标准实施规程.pdf ASTM D2421-2002(2007) Standard Practice for Interconversion of Analysis of C5 and Lighter Hydrocarbons to Gas-Volume Liquid-Volume or Mass Basis《C5和轻质烃类气体体积、液体体积或重量基准的分析互变现象用标准实施规程.pdf
  • ASTM D2421-2013 Standard Practice for Interconversion of Analysis of C5 and Lighter Hydrocarbons to Gas-Volume Liquid-Volume or Mass Basis《C5和轻质烃类气体体积、液体体积或重量基准的分析互变现象用标准操作规程》.pdf ASTM D2421-2013 Standard Practice for Interconversion of Analysis of C5 and Lighter Hydrocarbons to Gas-Volume Liquid-Volume or Mass Basis《C5和轻质烃类气体体积、液体体积或重量基准的分析互变现象用标准操作规程》.pdf
  • ASTM D2422-1997(2007) Standard Classification of Industrial Fluid Lubricants by Viscosity System《通过粘度体系对工业液态润滑剂的标准分类》.pdf ASTM D2422-1997(2007) Standard Classification of Industrial Fluid Lubricants by Viscosity System《通过粘度体系对工业液态润滑剂的标准分类》.pdf
  • ASTM D2422-1997(2013) Standard Classification of Industrial Fluid Lubricants by Viscosity System《通过粘度体系对工业液态润滑剂的标准分类》.pdf ASTM D2422-1997(2013) Standard Classification of Industrial Fluid Lubricants by Viscosity System《通过粘度体系对工业液态润滑剂的标准分类》.pdf
  • ASTM D2423-1990(2007) Standard Test Method for Surface Wax on Waxed Paper or Paperboard《蜡纸或纸板上表面蜡的标准试验方法》.pdf ASTM D2423-1990(2007) Standard Test Method for Surface Wax on Waxed Paper or Paperboard《蜡纸或纸板上表面蜡的标准试验方法》.pdf
  • ASTM D2423-1990(2012)e1 Standard Test Method for Surface Wax on Waxed Paper or Paperboard《蜡纸或纸板上表面蜡的标准试验方法》.pdf ASTM D2423-1990(2012)e1 Standard Test Method for Surface Wax on Waxed Paper or Paperboard《蜡纸或纸板上表面蜡的标准试验方法》.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1