ITU-R RAPPORT BT 1080-1 FRENCH-1990 International exchange of television programmes with data-encoded captions (sub-titles)《带数据编码字幕的电视节目的国际交流》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

CSN 24 4217-1959 Work rests for drilling of work pieces with ball ends《带球端的工件穿凿测试》.pdf

CSN 24 4260-1986 Adjustable clamping set square《可调钳拉三角板》.pdf

CSN 24 4283-1959 Sinusoidal vices《窦状隙老虎钳》.pdf

CSN 24 4290-1973 Coordinate table with accurate adjustment《带精调的坐标工作台》.pdf

CSN 24 6750-1971 Sine electromagnetic chuck crossadjustable《可调正弦电磁卡盘》.pdf

CSN 24 7202-1986 Adjustable cylindrical shanks and adjustable nuts Main dimensions《可调圆柱柄及可调螺母 主要尺寸》.pdf

CSN 24 7203-1986 Taper pin 7 24 for face arbortype cutter《7号锥形销：24号辊轴型弦切》.pdf

CSN 24 7206-1989 Tools chuck with external 7 24 taper for tools with adjustable cylindrical shanks Basic dimensions and technical regulations《外7号刀夹 带可调柱形柄24号锥形工具 基本尺寸及技术规则》.pdf

CSN 24 7223-1988 Boring bars for surface finishing with adjustable cylindrical shanks Basic dimensions《用于表面加工的带可调圆柱柄的钻杆 基本尺寸》.pdf