ITU-T E 191 NOTE-2002 B-ISDN numbering and addressing Corrigendum 1 (Study Group 2)《宽带综合业务数字网编号和寻址勘误1研究组2》.pdf

上传人:progressking105 文档编号:795007 上传时间:2019-02-02 格式:PDF 页数:1 大小:111.77KB
下载 相关 举报
ITU-T E 191 NOTE-2002 B-ISDN numbering and addressing Corrigendum 1 (Study Group 2)《宽带综合业务数字网编号和寻址勘误1研究组2》.pdf_第1页
第1页 / 共1页
亲,该文档总共1页,全部预览完了,如果喜欢就下载吧!
资源描述

1、Union internationale des tlcommunications Place des Nations 1211 GENVE 20 Suisse Switzerland Suiza COVERING NOTE GENERAL SECRETARIAT INTERNATIONAL TELECOMMUNICATION UNION Subject: Corrigendum 1 Geneva, 4 February 2002 Recommendation ITU-T E.191 (03/00) TELECOMMUNICATION STANDARDIZATION SECTOR OF ITU

2、 ITU-T Recommendation E.191 (03/2000) B-ISDN addressing Corrigendum 1 Replace clause 6.3.1 by the following: 6.3.1 ITU-IND AESA The ITU-IND AESA was established for use by ASPs for the provision of public ATM services. See Figure 2. T0209340-01SELIDPIDIDSPHO-DSP ESIAFIASPINDFigure 2/E.191 ITU-IND AE

3、SA Format The ITU-IND AESA format uses the individual AFI 77. The ITU IND is a 6 digit 3 octet fixed length numeric code (in the range 000000 to 999999) allocated by the ITU to the ASP. The HO-DSP is a 9-octet field for use by the ASP identified within the IDI. The remaining 7 octets of the ESI and SEL are for the end customers use. The ITU-IND AESA is the addressing scheme that is the preferred method for use in ASP networks. The selection of three octets for the IDI is to provide sufficient numbering capacity (1 Million) to ensure that the resource will not exhaust within the near future.

展开阅读全文
相关资源
猜你喜欢
  • EN ISO 15181-5-2008 en Paints and varnishes - Determination of release rate of biocides from antifouling paints - Part 5 Calculation of the tolylfluanid and dichlofluanid release r.pdf EN ISO 15181-5-2008 en Paints and varnishes - Determination of release rate of biocides from antifouling paints - Part 5 Calculation of the tolylfluanid and dichlofluanid release r.pdf
  • EN ISO 15181-6-2014 en Paints and varnishes - Determination of release rate of biocides from antifouling paints - Part 6 Determination of tralopyril release rate by quantitation of.pdf EN ISO 15181-6-2014 en Paints and varnishes - Determination of release rate of biocides from antifouling paints - Part 6 Determination of tralopyril release rate by quantitation of.pdf
  • EN ISO 15184-2012 en Paints and varnishes - Determination of film hardness by pencil test《涂料和清漆 铅笔试验测定膜硬度》.pdf EN ISO 15184-2012 en Paints and varnishes - Determination of film hardness by pencil test《涂料和清漆 铅笔试验测定膜硬度》.pdf
  • EN ISO 15186-1-2003 en Acoustics - Measurement of sound insulation in buildings and of building elements using sound intensity - Part 1 Laboratory measurements《声学 声强度法测量建筑物中和建筑构件隔音.pdf EN ISO 15186-1-2003 en Acoustics - Measurement of sound insulation in buildings and of building elements using sound intensity - Part 1 Laboratory measurements《声学 声强度法测量建筑物中和建筑构件隔音.pdf
  • EN ISO 15186-2-2010 en Acoustics - Measurement of sound insulation in buildings and of building elements using sound intensity - Part 2 Field measurements《声学 用声强测定建筑物和建筑构件的隔声性能 第2部.pdf EN ISO 15186-2-2010 en Acoustics - Measurement of sound insulation in buildings and of building elements using sound intensity - Part 2 Field measurements《声学 用声强测定建筑物和建筑构件的隔声性能 第2部.pdf
  • EN ISO 15186-3-2010 en Acoustics - Measurement of sound insulation in buildings and of building elements using sound intensity - Part 3 Laboratory measurements at low frequencies《声.pdf EN ISO 15186-3-2010 en Acoustics - Measurement of sound insulation in buildings and of building elements using sound intensity - Part 3 Laboratory measurements at low frequencies《声.pdf
  • EN ISO 15189-2012 en Medical laboratories - Requirements for quality and competence《医学实验室 质量和资格的要求》.pdf EN ISO 15189-2012 en Medical laboratories - Requirements for quality and competence《医学实验室 质量和资格的要求》.pdf
  • EN ISO 15193-2009 en In vitro diagnostic medical devices - Measurement of quantities in samples of biological origin - Requirements for content and presentation of reference measur.pdf EN ISO 15193-2009 en In vitro diagnostic medical devices - Measurement of quantities in samples of biological origin - Requirements for content and presentation of reference measur.pdf
  • EN ISO 15194-2009 en In vitro diagnostic medical devices - Measurement of quantities in samples of biological origin - Requirements for certified reference materials and the conten.pdf EN ISO 15194-2009 en In vitro diagnostic medical devices - Measurement of quantities in samples of biological origin - Requirements for certified reference materials and the conten.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1