1、 International Telecommunication Union ITU-T Q.2630.3TELECOMMUNICATION STANDARDIZATION SECTOR OF ITU Amendment 1(01/2006) SERIES Q: SWITCHING AND SIGNALLING Broadband ISDN Common aspects of B-ISDN application protocols for access signalling and network signalling and interworking AAL type 2 signalli
2、ng protocol Capability Set 3 Amendment 1: Support for the International Emergency Preference Scheme ITU-T Recommendation Q.2630.3 (2003) Amendment 1 ITU-T Q-SERIES RECOMMENDATIONS SWITCHING AND SIGNALLING SIGNALLING IN THE INTERNATIONAL MANUAL SERVICE Q.1Q.3 INTERNATIONAL AUTOMATIC AND SEMI-AUTOMATI
3、C WORKING Q.4Q.59 FUNCTIONS AND INFORMATION FLOWS FOR SERVICES IN THE ISDN Q.60Q.99 CLAUSES APPLICABLE TO ITU-T STANDARD SYSTEMS Q.100Q.119 SPECIFICATIONS OF SIGNALLING SYSTEMS No. 4, 5, 6, R1 AND R2 Q.120Q.499 DIGITAL EXCHANGES Q.500Q.599 INTERWORKING OF SIGNALLING SYSTEMS Q.600Q.699 SPECIFICATIONS
4、 OF SIGNALLING SYSTEM No. 7 Q.700Q.799 Q3 INTERFACE Q.800Q.849 DIGITAL SUBSCRIBER SIGNALLING SYSTEM No. 1 Q.850Q.999 PUBLIC LAND MOBILE NETWORK Q.1000Q.1099 INTERWORKING WITH SATELLITE MOBILE SYSTEMS Q.1100Q.1199 INTELLIGENT NETWORK Q.1200Q.1699 SIGNALLING REQUIREMENTS AND PROTOCOLS FOR IMT-2000 Q.1
5、700Q.1799 SPECIFICATIONS OF SIGNALLING RELATED TO BEARER INDEPENDENT CALL CONTROL (BICC) Q.1900Q.1999 BROADBAND ISDN Q.2000Q.2999 General aspects Q.2000Q.2099 Signalling ATM adaptation layer (SAAL) Q.2100Q.2199 Signalling network protocols Q.2200Q.2299 Common aspects of B-ISDN application protocols
6、for access signalling and network signalling and interworking Q.2600Q.2699 B-ISDN application protocols for the network signalling Q.2700Q.2899 B-ISDN application protocols for access signalling Q.2900Q.2999 For further details, please refer to the list of ITU-T Recommendations. ITU-T Rec. Q.2630.3
7、(2003)/Amd.1 (01/2006) i ITU-T Recommendation Q.2630.3 AAL type 2 signalling protocol Capability Set 3 Amendment 1 Support for the International Emergency Preference Scheme Summary This amendment was produced to meet the need for the implementation of the International Emergency Preference Scheme (I
8、EPS) as specified in ITU-T Rec. E.106. It contains the modifications to ITU-T Rec. Q.2630.3 (2003) in order to accommodate these needs. This amendment is designed to be compatible with implementations conforming to ITU-T Rec. Q.2630.3 (2003). Source Amendment 1 to ITU-T Recommendation Q.2630.3 (2003
9、) was approved on 27 January 2006 by ITU-T Study Group 11 (2005-2008) under the WTSA Resolution 1 procedure. ii ITU-T Rec. Q.2630.3 (2003)/Amd.1 (01/2006) FOREWORD The International Telecommunication Union (ITU) is the United Nations specialized agency in the field of telecommunications. The ITU Tel
10、ecommunication Standardization Sector (ITU-T) is a permanent organ of ITU. ITU-T is responsible for studying technical, operating and tariff questions and issuing Recommendations on them with a view to standardizing telecommunications on a worldwide basis. The World Telecommunication Standardization
11、 Assembly (WTSA), which meets every four years, establishes the topics for study by the ITU-T study groups which, in turn, produce Recommendations on these topics. The approval of ITU-T Recommendations is covered by the procedure laid down in WTSA Resolution 1. In some areas of information technolog
12、y which fall within ITU-Ts purview, the necessary standards are prepared on a collaborative basis with ISO and IEC. NOTE In this Recommendation, the expression “Administration“ is used for conciseness to indicate both a telecommunication administration and a recognized operating agency. Compliance w
13、ith this Recommendation is voluntary. However, the Recommendation may contain certain mandatory provisions (to ensure e.g. interoperability or applicability) and compliance with the Recommendation is achieved when all of these mandatory provisions are met. The words “shall“ or some other obligatory
14、language such as “must“ and the negative equivalents are used to express requirements. The use of such words does not suggest that compliance with the Recommendation is required of any party. INTELLECTUAL PROPERTY RIGHTS ITU draws attention to the possibility that the practice or implementation of t
15、his Recommendation may involve the use of a claimed Intellectual Property Right. ITU takes no position concerning the evidence, validity or applicability of claimed Intellectual Property Rights, whether asserted by ITU members or others outside of the Recommendation development process. As of the da
16、te of approval of this Recommendation, ITU had not received notice of intellectual property, protected by patents, which may be required to implement this Recommendation. However, implementors are cautioned that this may not represent the latest information and are therefore strongly urged to consul
17、t the TSB patent database. ITU 2006 All rights reserved. No part of this publication may be reproduced, by any means whatsoever, without the prior written permission of ITU. ITU-T Rec. Q.2630.3 (2003)/Amd.1 (01/2006) iii CONTENTS Page 1) Clause 2.1 . 1 2) Clause 4 2 3) Clause 5.1.2 5 4) Clause 5.1.3
18、 7 5) Clause 7.2.2 9 6) New clause 7.3.36. 13 7) Clause 8 13 8) Clause 8.2.1.1.1.1 . 14 9) Clause 8.2.1.1.1.2 . 18 10) Clause 8.2.1.1.2.1 . 20 11) Clause 8.2.1.1.2.2 . 21 12) Clause 8.2.2.1.1 22 13) Clause 8.2.2.1.2 25 14) Clause B.3. 27 ITU-T Rec. Q.2630.3 (2003)/Amd.1 (01/2006) 1 ITU-T Recommendat
19、ion Q.2630.3 AAL type 2 signalling protocol Capability Set 3 Amendment 1 Support for the International Emergency Preference Scheme 1) Clause 2.1 Revise clause 2.1 as follows: 2.1 Normative references The following ITU-T Recommendations and other references contain provisions, which through reference
20、 in this text, constitute provisions of this Recommendation. At the time of publication, the editions indicated were valid. All Recommendations and other references are subject to revision; users of this Recommendation are therefore encouraged to investigate the possibility of applying the most rece
21、nt edition of the Recommendations and other references listed below. A list of the currently valid ITU-T Recommendations is regularly published. The reference to a document within this Recommendation does not give it, as a stand-alone document, the status of a Recommendation. 1 ITU-T Recommendation
22、I.363.2 (2000), B-ISDN ATM Adaptation Layer specification: Type 2 AAL. 2 ITU-T Recommendation I.361 (1999), B-ISDN ATM layer specification. 3 ITU-T Recommendation X.200 (1994), Information technology Open Systems Interconnection Basic reference model: The basic model. 4 ITU-T Recommendation X.210 (1
23、993), Information technology Open Systems Interconnection Basic reference model: Conventions for the definition of OSI services. 5 ITU-T Recommendation X.213 (2001), Information technology Open Systems Interconnection Network service definitions. 6 ITU-T Recommendation Q.850 (1998), Usage of cause a
24、nd location in DSS 1 and SS No. 7 ISUP. 7 ITU-T Recommendation Q.2610 (1999), Usage of cause and location in B-ISDN User Part and DSS 2. 8 ITU-T Recommendation I.366.2 (1999), AAL type 2 service specific convergence sublayer for trunking. 9 ITU-T Recommendation I.366.1 (1998), Segmentation and Reass
25、embly Service Specific Convergence Sublayer for the AAL type 2. 10 ITU-T Recommendation E.164 (1997), The international public telecommunication numbering plan. 11 IEEE Standard 802-2001, IEEE Standards for Local and Metropolitan Area Networks: Overview and Architecture. 12 ITU-T Recommendation Q.21
26、50.0 (2001), Generic signalling transport service. 13 ITU-T Recommendation I.356 (2000), B-ISDN ATM layer cell transfer performance. 2 ITU-T Rec. Q.2630.3 (2003)/Amd.1 (01/2006) 14 ITU-T Recommendation I.366.2 (2000), AAL type 2 service specific convergence sublayer for narrowband services. 15 ITU-T
27、 Recommendation Q.2630.1 (1999), AAL type 2 signalling protocol Capability Set 1. 16 ITU-T Recommendation Q.2630.2 (2000), AAL type 2 signalling protocol Capability Set 2. 17 ITU-T Recommendation E.412 (2003), Network management controls. 18 ITU-T Recommendation Q.542 (1993), Digital exchange design
28、 objectives Operations and maintenance. 19 ITU-T Recommendation I.378 (2002), Traffic control and congestion control at the ATM Adaptation Layer Type 2. 20 ITU-T Recommendation E.106 (2003), International Emergency Preference Scheme (IEPS) for disaster relief operations. 2) Clause 4 Add the followin
29、g new abbreviations alphabetically: 4 Abbreviations A2P AAL type 2 Path Identifier A2SU AAL type 2 Served User AAL ATM Adaptation Layer ACC Automatic Congestion Control AESA ATM End System Address AMR Adaptive Multi-rate Codec ANI Adjacent AAL type 2 Node Identifier ATM Asynchronous Transfer Mode AT
30、M VCC ATM Virtual Channel Connection BCD Binary Coded Decimal BLC Block Confirm Message BLO Block Request Message CAS Channel Associated Signalling CAU Cause Parameter CEID AAL type 2 Connection Element Identifier CFN Confusion Message CID Channel Identifier CMD Circuit Mode Data CP Connection Prior
31、ity CPHL CPS Packet Header Overhead Length CPS (AAL type 2) Common Part Sublayer ITU-T Rec. Q.2630.3 (2003)/Amd.1 (01/2006) 3 CS Capability Set CS-1 Capability Set 1 (ITU-T Rec. Q.2630.1 15) CS-2 Capability Set 2 (ITU-T Rec. Q.2630.2 16) CS-3 Capability Set 3 (this Recommendation) DA2EA Destination
32、AAL type 2 Service Endpoint Address (Note 1) DESEA Destination E.164 Service Endpoint Address Parameter (Note 1) DNSEA Destination NSAP Service Endpoint Address Parameter (Note 1) DSAID Destination Signalling Association Identifier DTMF Dual Tone Multi-Frequency ECF Establish Confirm Message ERQ Est
33、ablish Request Message FAX Demodulated Facsimile Data FBW Fixed Bandwidth Transfer Capability FRM Frame Mode Data GST Generic Signalling Transport HBx Header Bit Rate associated with x HC Hop Counter ID Identifier IEC International Electrotechnical Commission IEEE Institute of Electrical and Electro
34、nics Engineers IEPS International Emergency Preference Scheme II IEPS Indicator ISO International Organization for Standardization LB Loopback LC Link Characteristics (Note 2) LM Layer Management LSB Least Significant Bit M Mandatory MF-R1 Multi-Frequency R1 MF-R2 Multi-Frequency R2 MOA Modification
35、 Acknowledge message MOD Modification Request message MOR Modification Reject message MSB Most Significant Bit MSLC Modify Support for Link Characteristics MSSSI Modify Support for SSCS Information MTP3b Message Transfer Part level 3 using ITU-T Rec. Q.2140 29 4 ITU-T Rec. Q.2630.3 (2003)/Amd.1 (01/
36、2006) NF Nodal Function NNI Network-Network Interface NSAP Network Service Access Point O Optional OA2EA Origination AAL type 2 Service Endpoint Address OESEA Origination E.164 Service Endpoint Address Parameter ONSEA Origination NSAP Service Endpoint Address Parameter OSAID Originating Signalling A
37、ssociation Identifier (Parameter) OUI Organizational Unique Identifier PFBW Preferred FBW PLC Preferred Link Characteristics PSSCS Preferred SSCS Information PSSIAE Preferred Service Specific Information (Audio Extended) PSSIME Preferred Service Specific Information (Multirate Extended) PT Path Type
38、 PTC Preferred Transfer Capability PVBWS Preferred VBWS PVBWT Preferred VBWT PVC Permanent Virtual Channel RC Rate Control REL Release Request Message RES Reset Request Message RLC Release Confirm Message RSC Reset Confirm Message SAAL ATM Adaptation Layer for Signalling SAID Signalling Association
39、Identifier SAP Service Access Point SAR Segmentation and Reassembly (Sublayer) SDL Specification and Description Language SDU Service Data Unit SPVC Soft PVC SSCOP Service Specific Connection Oriented Protocol SSCS Service Specific Convergence Sublayer SSCS SSCS Information SSIA Service Specific Inf
40、ormation (Audio) Parameter SSIAE Service Specific Information (Audio Extended) SSIM Service Specific Information (Multirate) Parameter ITU-T Rec. Q.2630.3 (2003)/Amd.1 (01/2006) 5 SSIME Service Specific Information (Multirate Extended) SSISA Service Specific Information (SAR-assured) Parameter SSISU
41、 Service Specific Information (SAR-unassured) Parameter SSSAR Segmentation and Reassembly Service Specific Convergence Sublayer STC Signalling Transport Converter SUCI Served User Correlation ID SUGR Served User Generated Reference SUT Served User Transport SVC Switched Virtual Channel SYN Synchroni
42、zation of change in SSCS operation TAR Temporary Alternative Routing TC Transfer Capability TCC TAR Controlled Connection TCI Test Connection Indication TCS Transfer Capability Support TED Transmission Error Detection UBC Unblock Confirm Message UBL Unblock Request Message UNI User-Network Interface
43、 UU User-user VBWS Variable Bandwidth Stringent Transfer Capability VBWT Variable Bandwidth Tolerant Transfer Capability VCC Virtual Channel Connection VPC Virtual Path Connection NOTE 1 In ITU-T Recs Q.2630.1 15 and Q.2630.2 16, the abbreviation A2EA was used instead of DA2EA, ESEA instead of DESEA
44、, and NSEA instead of DNSEA. NOTE 2 In ITU-T Rec. Q.2630.1 15, the abbreviation ALC was used instead of LC. 3) Clause 5.1.2 Revise clause 5.1.2 as follows: 5.1.2 Primitives between AAL type 2 signalling entities and the AAL type 2 served user The A2SU-SAP primitives are used: 1) by the originating s
45、erved user to initiate AAL type 2 connection establishment and by the originating and destination served users to initiate the release of a connection; 2) by the AAL type 2 signalling entities to indicate an incoming connection to the destination served user and notifying either the originating or d
46、estination served user of the release of a connection; 3) by the modification sending served user to originate, and the modification receiving served user to respond to, an AAL type 2 connection resource modification request; and 6 ITU-T Rec. Q.2630.3 (2003)/Amd.1 (01/2006) 4) by the AAL type 2 sign
47、alling entities to indicate a modification of the AAL type 2 connection resource to the modification receiving served user and notify the modification originating served user of the successful or unsuccessful modification. NOTE When sending a primitive between the signalling protocol and its user, t
48、he primitive needs to be associated with a particular AAL type 2 connection instance. The mechanism used for this binding is considered to be an implementation detail and therefore is outside the scope of this Recommendation. The services are provided through the transfer of primitives which are sum
49、marized in Table 5-1, and are defined after the table. The AAL type 2 served user passes information in parameters in the primitives. Some of those parameters are mandatory and some are optional; the appropriate usage of the parameters is described in clause 8. Table 5-1/Q.2630.3 Primitives and parameters exchanged between the AAL type 2 signalling entities and the AAL type 2 served user Type Primitive Generic Name Request Indication Response Confirm ESTABLISH DA2EA, OA2EA, SUGR, SU
