1、 4b25L Ob06834 632 INTERNATIONAL TELECOMMUNICATION UN ION ITU-T TELECOMMUNICATION STANDARDIZATION SECTOR OF TU X.295 (04195) DATA NETWORKS AND OPEN SYSTEM COMMUNICATIONS - OPEN SYSTEMS INTERCONNECTION - CONFORMANCE TESTING OS1 CONFORMANCE TESTING METHODOLOGY AND FRAMEWORK FOR PROTOCOL RECOMMENDATION
2、S PROFILE TEST SPECIFICATION FOR ITU-T APPLICATIONS - PROTOCOL ITU-T Recommendation X.295 (Previously ?CCIlT Recommendation?) = 4862591 ObOb15 579 m FOREWORD The ITU-T (Telecommunication Standardization Sector) is a permanent organ of the International Telecommunication Union (ITU). The ITU-T is res
3、ponsible for studying technical, operating and tariff questions and issuing Recommen- dations on them with a view to standardizing telecommunications on a worldwide basis. The World Telecommunication Standardization Conference (WTSC), which meets every four years, establishes the topics for study by
4、 the ITU-T Study Groups which, in their turn, produce Recommendations on these topics. The approval of Recommendations by the Members of the ITU-T is covered by the procedure laid down in WTSC Resolution No. 1 (Helsinki, March 1-12, 1993). ITU-T Recommendation X.295 was prepared by ITU-T Study Group
5、 7 (1993-1996) and was approved under the WTSC Resolution No. 1 procedure on the 10th of April 1995. NOTE In this Recommendation, the expression “Administration” is used for conciseness to indicate both a telecommunication administration and a recognized operating agency. O ITU 1996 All rights reser
6、ved. No part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from the ITU. 48b2591 ObObBLb 405 = Services and Facilities Interfaces ITU-T X-SERIES RECOMMENDATIONS X.l-X. 19 X.
7、20-X.49 DATA NETWORKS AND OPEN SYSTEM COMMUNICATIONS Transmission, Signalling and Switching Network AsDects (February 1994) X.50-X.89 X.90-X. 149 ORGANIZATION OF X-SERIES RECOMMENDATIONS Administrative Arrangements OPEN SYSTEMS INTERCONNECTION I Subiect area I Recommendation Series I X. 180-X. 199 I
8、 PUBLIC DATA NETWORKS I I _ Service Definitions Connection-mode Protocol Specifications _ _ X.210-X.2 19 X.220-X.229 Connectionless-mode Protocol Specifications PICS Proformas I Maintenance I X. 150-X. 179 I X.230-X.239 X.240-X.259 Security Protocols Layer Managed Objects I Model and Notation I X.20
9、0-X.209 I X.270-X.279 X.280-X.289 Conformance Testing INTERWORKING BETWEEN NETWORKS X.290-X.299 I Protocol Identification I X.260-X.269 I Mobile Data Transmission Systems Management _ X.350-X.369 X.370-X.399 MESSAGE HANDLING SYSTEMS DIRECTORY I General I X.300-X.349 I X.400-X.499 X.500-X.599 Network
10、ing Naming, Addressing and Registration X.600-X.649 X.650-X.679 I OS1 NETWORKING AND SYSTEM ASPECTS I I Commitment, Concurrency and Recovery Transaction Processing X.850-X.859 X.860-X.879 I Abstract Syntax Notation One (ASN.l) I X.680-X.699 I Remote Operations OPEN DISTRIBUTED PROCESSING I X.700-X.7
11、99 OS1 MANAGEMENT X.880-X.899 X.900-X.999 I SECURITY I X.800-X.849 I OS1 APPLICATIONS I I 4862593 0606817 341 4862.571 ObOb8l18288 = CONTENTS 1 2 3 4 5 6 7 8 9 10 Scope References Definitions Abbreviations . Compliance Principles of profile contents and profile conformance The meaning of conformance
12、 to a profile 6.1 6.2 Profile conformance requirements 6.3 Expression of profile extra information for testing . General testing principles . Rules to develop the elements of a Profile Test Specification (PTS) . Relationship with base specification testing . 7.1 7.2 7.3 7.4 Abstract Test Methods (AT
13、Ms) 7.5 System under Test (SUT) configuration . The Profile Test Specification Summary (PST-Summary) 8.1 Introduction 8.2 Contents of a PTS-Summary Profile Specific Test Specification (PSTS) The Profile Test Specification (PTS) development process . 10.1 Introduction 10.2 The profile Implementation
14、Conformance Statement (profile ICs) proforma . 10.3 The conformance testing specification for each component . 10.4 Profile specific elements of the Profile Test Specification (PTS) . 10.5 Minimum status for standardization . 10.6 Packaging of the PTS-Summary and Profile Specific Test Specification
15、(PSTS) Profile Test Specification (PTS) . Annex A . PTS-Summary template A.1 Introduction A.2 Conformance of a PTS-Summary to this template . A.3 PTS-Summary . Recommendation X.295 (04/95) Page 1 1 2 2 3 3 3 4 5 5 5 5 6 7 7 7 7 7 9 10 10 10 10 12 12 12 14 14 14 15 1 V86259L ObOb8L 114 SUMMARY This R
16、ecommendation provides OS1 protocol profile testing methodology based on the protocol testing methodology specified in Recommendation X.291. This Recommendation describes the meaning of conformance to a profile, the method of expressing profile conformance requirements, and profile testing principle
17、s which are based on the methodology defined for the base protocol specifications. The text was developed jointly with ISO/iEC JTC1. 11 Recommendation X.295 (04/95) m YB6259L ObOb820 936 INTRODUCTION This Recommendation provides OS1 protocol profile testing methodology based on the protocol testing
18、methodology specified in Recommendation X.291. Recommendation X.290 defines terminology and introduces general concepts for both protocol and profile testing. Recommendation X.293 places requirements on test realization and Recommendation X.294 places requirements on the conformance assessment proce
19、ss, both of which are applicable to profile testing. Recommendation X.296 describes how profile requirements are documented in Implementation Conformance Statements (ICSs) and profile Requirements Lists (Us). A profile specification is a document containing one or more profiles. An International Sta
20、ndardized Profile (ISP) is an example of a standardized profile specification. A profile is defined as the selection of one or more base specifications and the identification of the chosen classes, common subsets, options and parameters of those base specifications necessary for accomplishing a part
21、icular function. Profiles are defined to facilitate interworking between systems implementing the same profile. A profile implementation is tested for conformance to the relevant profile specification in order to give confidence that interworking can be achieved, and to verify that the implementatio
22、n conforms to the profile specification. The meaning of conformance to a profile and the method of expressing profile conformance requirements are described in clause 6. Profile testing principles, based on the methodology defined for the base protocol specifications, are described in clause 7. The
23、Profile Test Specification (PTS) is the complete set of documents needed to specify conformance testing for a profile. The PTS is based on the Abstract Test Suite (ATS) specifications of the protocols referenced by the profile. The PTS is described in clause 7. The PTS-Summary provides, in a single
24、document, references to all the elements of the PTS. The PTS-Summary is described in clause 8 and a template for a PTS-Summary is described in Annex A. The Profile Specific Test Specification (PSTS) contains any changes to the ATS specifications relevant to the base specifications and the additional
25、 test cases required for the profile testing. The PSTS is described in clause 9. This Recommendation is also published as ISO/IEC 9646-6: 1994. . Recommendation X.295 (04/95) 111 Yb2591 Ob06822 709 Recommendation X.295 OS1 CONFORMANCE TESTING METHODOLOGY AND FRAMEWORK FOR PROFILE TEST SPECIFICATIONI
26、) (1995) PROTOCOL RECOMMENDATIONS FOR ITU-T APPLICATIONS - PROTOCOL 1 Scope This Recommendation specifies the requirements and provides guidance for the production of Profile Test Specifications (PTSs) for conformance testing of OS1 protocol profiles. This Recommendation also specifies requirements
27、concerning the expression of conformance requirements in protocol profile specifications. This Recommendation is applicable to testing the conformance of a profile implementation to the static and dynamic conformance requirements of each protocol and any information objects included in the profile,
28、by controlling and observing Protocol Data Unit (PDU) exchanges. Testing requirements that go beyond conformance are outside the scope of this Recommendation. 2 References The following Recommendations and other references contain provisions which, through reference in this text, constitute provisio
29、ns of this Recommendation. At the time of publication, the editions indicated were valid. All Recommendations and other references are subject to revision: all users of this Recommendation are therefore encouraged to investigate the possibility of applying the most recent edition of the Recommendati
30、ons and other references listed below. A list of currently valid ITU-T Recommendations is regularly published. ITU-T Recommendation X.200 (1994) I ISOAEC 7498-1:1994, Information technology - Open Systems Interconnection - Basic Reference Model: The Basic Mode. ITU-T Recommendation X.210 (1993) I IS
31、OAEC 10731: 1994, Information technology - Open Systems Interconnection - Conventions for the definition of OSI services. ITU-T Recommendation X.290 (19954, OS1 conformance testing methodology and framework for protocol Recommendations for ITU-T applications - General concepts. ISO/IEC 9646- 1 : 199
32、4, Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 1: General concepts, ITU-T Recommendation X.291 (1995), OS1 conformance testing methodology and framework for protocol Recommendations for ITU-T applications - Abstract test suite specific
33、ation. ISOIEC 9646-2: 1994, Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 2: Abstract test suite specification. CCITT Recommendation X.292 (1992), OS1 conformance testing methodology and framework for protocol Recommendations for CCIT ap
34、plications - The Tree und Tabular Combined Notation (TCN). ISO/IEC 9646-3: 1992, Information technology - Open Systems Interconnection - Conformance testing merhodology and framework - Part 3: The Tree and Tabular Combined Notation (TCN). - - - - - Recommendation X.295 and ISOflEC 9646-6, Informatio
35、n technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 6: Protocol profile test specification, are technically aligned. Recommendation X.295 (04/95) 1 ISOAEC 9646-3: 1992 Amd 12), Information technology - Open Systems Interconnection - Conformance testing
36、methodology and framework - Part 3: The Tree and Tabular Combined Notation (ITCN) - Amendment I: ITCN extensions. ITU-T Recommendation X.293 (1995), OSI conformance testing methodology and framework for protocol Recommendations for ITU-T applications - Test realization. ISOAEC 9646-4: 1994, Informat
37、ion technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 4: Test realization. ITU-T Recommendation X.294 (1993, OS1 conformance testing methodology and framework for protocol Recommendations for ITU-T applications - Requirements on test laboratories and cl
38、ients for the conformance assessment process. - - ISO/IEC 9646-5: 1994, Information technology - Open Systems Inrerconnection - Conformance testing methodology and framework - Part 5: Requirements on test laboratories and clients for the conformance assessment process. ITU-T Recommendation X.2963),
39、OS1 conformance testing methodology and framework for protocol Recommendations for ITU-T applications - Implementation conformance statements. ISOAEC 9646-7: 1995, Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 7: Implementation conforman
40、ce statement. ISOAEC TR 10000-1 : 1992, Information technology - Framework and taxonomy of Intemational Standardized Profiles - Part I: Framework. ISOAEC TR 10000-2: 1994, Information technology - Framework and taxonomy of International Standardized Profiles - Part 2: Principles and Taxonomy for OS1
41、 Profiles. 3 Definitions For the purposes of this Recommendation, all the definitions in Recommendation X.290 apply. In addition, the following definition applies to this Recommendation: 3.1 component (of a profile): A component of a profile is a single protocol or a combination of one or more proto
42、cols with zero or more information objects upon which a profile is based and which are to be tested in combination. 4 Abbreviations For the purposes of this Recommendation, the following abbreviations defined in Recommendation X.290 apply: ATM Abstract Test Method ATS Abstract Test Suite ICs Impleme
43、ntation Conformance Statement ISP International Standardized Profile IUT Implementation under Test IXIT MOT Means of Testing os1 Open Systems Interconnection PCO PCTR Protocol Conformance Test Report PETS Parameterized Executable Test Suite Implementation Extra Information for Testing Point of Contr
44、ol and Observation 2, To be published. 3, Presently at the stage of draft. 2 Recommendation X.295 (04/95) W 486259L 0606824 581 PICS Protocol Implementation Conformance Statement PIXIT PSTS Profile Specific Test Specification PTS Profile Test Specification RL Requirements List Protocol Implementatio
45、n Extra Information For Testing SCS System Conformance Statement SCTR System Conformance Test Report SUT System under Test TMP Test Management Protocol TSS thus a profile may retain base specification options as options of the profile provided that they do not affect interworking; b) shall not speci
46、fy any requirements that would contradict or cause non conformance to the base specifications to which it refers; Recommendation X.295 (04/95) 3 4862.593 bOb25 458 m c) may contain conformance requirements which are more specific and limited in scope than those of the base specifications to which it
47、 refers. For example, when a feature is associated with an allowed parameter value range, the profile shall only adopt the same value range as that allowed by the base specification, or a subset of that range. Therefore, conformance to that set of base specifications does not necessarily imply confo
48、rmance to the profile. However, conformance to a profile implies by definition conformance to the set of base specifications which it references. 6.2 Profile conformance requirements 6.2.1 Introduction The concepts of static conformance and dynamic conformance apply also to profiles. 6.2.2 Static co
49、nformance requirements clause In order to ensure consistency between profiles and base specifications, the static conformance requirements of a profile shall be specified, where possible, by reference to the conformance requirements of the referenced base specifications. There shall be a static conformance requirements clause in a profile, structured as follows: a) an overview of the major subsets or implementation categories which provides an overall rationale for the more detailed selection of classes
