JUS B A3 101-1996 Oil mining-Letter symbols in petroleum reservoir engineering《石油采矿 油藏工程用文字符号》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSD-M1A283-B6-2010 STEEL CROSS REFERENCE FOR STANDARD PARTS TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSD-M1A283-B1)《钢 标准零件的对照检索 与福特WSS-M99P1111-A 一起使用 在福特WSD-M1A.pdf

FORD WSD-M1A283-B7-2010 STEEL CROSS REFERENCE FOR STANDARD PARTS TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSD-M1A283-B1)《钢 标准零件的对照检索 与福特WSS-M99P1111-A 一起使用 在福特WSD-M1A.pdf

FORD WSD-M1A283-B8-2010 STEEL CROSS REFERENCE FOR STANDARD PARTS TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSD-M1A283-B1)《钢 标准零件的对照检索 与福特WSS-M99P1111-A 一起使用 在福特WSD-M1A.pdf

FORD WSD-M1A283-B9-2010 STEEL CROSS REFERENCE FOR STANDARD PARTS TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSD-M1A283-B1)《钢 标准零件的对照检索 与福特WSS-M99P1111-A 一起使用 在福特WSD-M1A.pdf

FORD WSD-M1A284-B-2002 STEEL SCREWS AND BOLTS SURFACE HARDENED 1000 N MM2 TENSILE STRENGTH TO BE USED WITH FORD WSS-M99P1111-A 《抗拉强度为1000 N MM2的表面淬火钢螺钉和螺栓 与标准FORD WSS-M99P1111-A.pdf

FORD WSD-M1A286-A1-2002 STEEL SHEET TERNE COATED (TERNE PLATE) TO BE USED WITH FORD WSS-M99P1111-A 《铅锡涂层的钢板 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSD-M1A286-A2-2002 STEEL SHEET TERNE COATED (TERNE PLATE) TO BE USED WITH FORD WSS-M99P1111-A (Shown on WSD-M1A286-A1)《铅锡合金涂层钢板 与标准FORD WSS-M99P1111-A一起使用 列于标准WSD-M1A286-A.pdf

FORD WSD-M1A286-A3-2002 STEEL SHEET TERNE COATED (TERNE PLATE) TO BE USED WITH FORD WSS-M99P1111-A (Shown on WSD-M1A286-A1)《铅锡合金涂层钢板 与标准FORD WSS-M99P1111-A一起使用 列于标准WSD-M1A286-A.pdf

FORD WSD-M1A288-A1-2011 GREY CAST IRON TO BE USED WITH FORD WSS-M99P1111-A 《灰口铸铁 与福特WSS-M99P1111-A 一起使用》.pdf