JUS C J9 017-1991 Preclsion castings Tolerances surface flnlsh and machining alovanses《精密铸件 公差、表面抛光和加工余量》.pdf

相关资源

JIS B0403-1995 铸件.尺寸公差和机械加工余量体系.pdf

CB T 3474.2-1992 船用主辅机钢模锻件公差及机械加工余量.pdf

CB-Z 45-1985 有色合金铸件机械加工余量.pdf

HB 6077-1986 模锻件公差及机械加工余量.pdf

JB T 9179.5-1999 水压机上自由锻件机械加工余量与公差 短圆柱类.pdf

HB 0-7-1967 铸件尺寸公差和加工余量.pdf

HB 6587-1992 锤上自由锻件机械加工余量与尺寸公差.pdf

HB 6103-2004 铸件尺寸公差和机械加工余量.pdf

QJ 1122.1-1987 切削加工余量 小尺寸零件.pdf

JB T 11759-2013 冷轧轴承环件机械加工余量及公差.pdf

猜你喜欢

GOST 29232-1991 Anionic and non-ionic surface active agents Determination of the critical micellization concentration Method by measuring surface tension with a plate stirrup or ri.pdf

GOST 29233-1991 Drilling rings and drills for solid mineral resources Basic parameters《固体有用矿物钻探用装置与机床 基本参数》.pdf

GOST 29234 0-1991 Moulding sands General requirements for test methods《造型砂 试验方法一般要求》.pdf

GOST 29234 1-1991 Moulding sands Methods for determination of clayey fraction《造型砂 粘土微粒的测定法》.pdf

GOST 29234 10-1991 Moulding sands Methods for determination for potassium and sodium oxides《造型砂 氧化钾和氧化钠的测定方法》.pdf

GOST 29234 11-1991 Moulding sands Method for determination of gas permeability《造型砂 透气性的测定方法》.pdf

GOST 29234 12-1991 Moulding sands Method for determination of sand grains shape《造型砂 砂粒形状测定方法》.pdf

GOST 29234 13-1991 Moulding sands Method for determination of mass loss on ignition《造型砂 灼烧质量损失测定方法》.pdf

GOST 29234 2-1991 Moulding sands Method for determination of silicon dioxide《造型砂 二氧化硅的测定法》.pdf