JUS F S3 305-1983 Textile Test for colour fastness Colour fastness to rubbing《织物 色牢度检测 耐摩擦色牢度》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST ISO 1307-2013 Rubber and plastics hoses Sizes minimum and maximum inside diameters tolerances on cut-to-length《橡胶和塑料软管 规格和最大最小内径及切割长度公差》.pdf

GOST ISO 13082-2014 Milk and milk products Determination of the lipase activity of pregastric lipase preparation《奶和奶制品 前胃脂酶制备脂酶活性的测定》.pdf

GOST ISO 13357-1-2013 Petroleum products Determination of the filterability of lubricating oils Part 1 Oils in the presence of water《石油制品 润滑油过滤性的测定 第1部分 水中过滤油》.pdf

GOST ISO 13357-2-2013 Petroleum products Determination of the filterability of lubricating oils Part 2 Dry oils《石油产品 润滑油滤过性的测定 第2部分 干性油》.pdf

GOST ISO 13397-1-2011 Periodontal curettes dental scalers and excavators Part 1 General reguirements《牙周刮匙、牙刮器和牙挖器 第1部分 通用要求》.pdf

GOST ISO 13397-2-2011 Dental curettes scalers and excavators Part 2 Periodontal curettes of Gr-type Construction and sizes《牙科学 牙周刮匙、牙刮器和牙挖器 第2部分 Gr型牙周刮匙 结构和尺寸》.pdf

GOST ISO 13397-3-2011 Periodontal curettes dental scalers and excavators Part 3 Dental scalers H-type Construction and sizes《牙周刮匙 刮牙器和凿子 第3部分 刮牙器 H-型 构造和尺寸》.pdf

GOST ISO 13397-4-2011 Dental curettes scalers and excavators Part 4 Dental excavators - discoid type Construction and sizes Test methods《牙周刮匙 刮牙器和凿子 第4部分 牙科用凿子 平圆型 构造和尺寸 试验方法》.pdf

GOST ISO 13402-2011 Surgical and dental hand instruments Determination of resistance against autoclaving corrosion and thermal exposure Test methods《外科及牙科手持仪器 耐高压灭菌 腐蚀及热暴露的测定 试验方法》.pdf