JUS K D0 066-1995 Reduction sleeves with taper shank 7 24 for parallel shanks with lateral driving surface《带有侧传动面的直柄用带7 24锥柄的缩径套管》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSS-M2D507-A-2004 THERMOPLASTIC ELASTOMER (TES) STYRENE BLOCK COPOLYMER 45 DUROMETER A HARDNESS INTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《汽车内部用硬度为45 A的热塑性弹性体(TES+TPU)苯乙烯.pdf

FORD WSS-M2D507-A-2016 THERMOPLASTIC ELASTOMER (TES) STYRENE BLOCK COPOLYMER 45 DUROMETER A HARDNESS INTERIOR TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M2D507-A2-2004 THERMOPLASTIC ELASTOMER (TES) STYRENE BLOCK COPOLYMER 60 DUROMETER A HARDNESS INTERIOR TO BE USED WITH FORD WSS-M99P1111-A (Shown on WSS-M2D507-A)《汽车内部用硬度.pdf

FORD WSS-M2D507-A2-2016 THERMOPLASTIC ELASTOMER (TES) STYRENE BLOCK COPOLYMER 60 DUROMETER A HARDNESS INTERIOR TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSS-M2D507-A).pdf

FORD WSS-M2D507-A3-2004 THERMOPLASTIC ELASTOMER (TES) STYRENE BLOCK COPOLYMER 75 DUROMETER A HARDNESS INTERIOR TO BE USED WITH FORD WSS-M99P1111-A (Shown on WSS-M2D507-A)《汽车内部用硬度.pdf

FORD WSS-M2D507-A4-2004 THERMOPLASTIC ELASTOMER (TES) STYRENE BLOCK COPOLYMER 80 DUROMETER A HARDNESS INTERIOR TO BE USED WITH FORD WSS-M99P1111-A (Shown on WSS-M2D507-A)《汽车内部用硬度.pdf

FORD WSS-M2D507-A4-2016 THERMOPLASTIC ELASTOMER (TES) STYRENE BLOCK COPOLYMER 80 DUROMETER A HARDNESS INTERIOR TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSS-M2D507-A).pdf

FORD WSS-M2D507-A5-2004 THERMOPLASTIC ELASTOMER (TES) STYRENE BLOCK COPOLYMER 90 DUROMETER A HARDNESS INTERIOR TO BE USED WITH FORD WSS-M99P1111-A (Shown on WSS-M2D507-A)《汽车内部用硬度.pdf

FORD WSS-M2D507-A6-2004 THERMOPLASTIC ELASTOMER (TES) STYRENE BLOCK COPOLYMER 25 DUROMETER A HARDNESS TO BE USED WITH FORD WSS-M99P1111-A 《硬度为25 A的热塑性弹性体(TES)苯乙烯嵌段共聚物 与标准FORD WS.pdf