JUS K G5 250-1985 Screvvdrivers for recessed head screws Dimensions《凹陷螺丝螺丝刀 尺寸》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DIN EN 212-2003 Wood preservatives - General guidance on sampling and preparation for analysis of wood preservatives and treated timber German version EN 212 2003《木材防腐剂 木材防腐剂和经过防腐处.pdf

DIN EN 2122-1996 Aerospace series - Washers flat in aluminium alloy anodized or chromated German version EN 2122 1996《航空航天系列 阳极处理和铬酸钝化铝合金平垫圈》.pdf

DIN EN 2126-1993 Aerospace series aluminium alloy AL-P7075-T651 plate 6 mm a 80 mm German version EN 2126 1992《航空航天 AL-P7075-T651铝合金 6mm∠a≤800mm中厚板材》.pdf

DIN EN 2127-1993 Aerospace series aluminium alloy AL-P7075-T73511 extruded bars and sections a or D 100 mm German version EN 2127 1992《航空航天 AL-P7075-T73511铝合金 a或D≤100mm的挤压棒材和型材》.pdf

DIN EN 2128-1993 Aerospace series aluminium alloy AL-P7075-T73511 drawn bars 6 mm a or D 75 mm German version EN 2128 1992《航空航天 AL-P7075-T73511铝合金 6mm≤a或D≤75mm 拉制棒材》.pdf

DIN EN 2130-2002 Aerospace series - Bearings precision ball in corrosion resisting steel for instruments and equipment - Technical specification German version EN 2130 2001《航空航天系列 .pdf

DIN EN 2131-2003 Aerospace series - Plates in aluminium alloys thickness 6 mma160 mm - Dimensions German and English version EN 2131 2001《航空航天系列 厚度6mm a 160mm的铝合金板 尺寸》.pdf

DIN EN 2133-2011 Aerospace series - Cadmium plating of steels with specified tensile strength 1 450 MPa copper copper alloys and nickel alloys German and English version EN 2133 20.pdf

DIN EN 2134-2003 Aerospace series - Round bars extruded in aluminium and aluminium alloys diameter 10 mmD220 mm - Dimensions German and English version EN 2134 2001《航空航天系列 直径10mm D.pdf