JUS K T3 113-1983 Tile gauges GO and NOT GO for measures over 12 up to and including 100 mm nominal size《匹配或不匹配公称尺寸在12至100毫米（包括100毫米）之间测量的砖检测仪》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM D7682-2012 red 4375 Standard Test Method for Replication and Measurement of Concrete Surface Profiles Using Replica Putty《采用仿制腻子复制和测量混凝土表面轮廓的标准试验方法》.pdf

ASTM D7682-2017 0916 Standard Test Method for Replication and Measurement of Concrete Surface Profiles Using Replica Putty《采用仿制腻子复制和测量混凝土表面轮廓的标准试验方法》.pdf

ASTM D7683-2011 4375 Standard Test Method for Cloud Point of Petroleum Products (Small Test Jar Method)《石油产品浊点标准试验方法(小烧杯试验法)》.pdf

ASTM D7683-2017 red 0625 Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Small Test Jar Method)《石油产品和液体燃料浊点的标准试验方法(小测试罐法)》.pdf

ASTM D7684-2011 0625 Standard Guide for Microscopic Characterization of Particles from In-Service Lubricants《使用中的润滑油微粒微观特性的标准指南》.pdf

ASTM D7684-2011(2016) 7340 Standard Guide for Microscopic Characterization of Particles from In-Service Lubricants《在用润滑剂颗粒的微观表征指南》.pdf

ASTM D7685-2011 0000 Standard Practice for In-Line Full Flow Inductive Sensor for Ferromagnetic and Non-ferromagnetic Wear Debris Determination and Diagnostics for Aero-Derivative .pdf

ASTM D7685-2011(2016) 4935 Standard Practice for In-Line Full Flow Inductive Sensor for Ferromagnetic and Non-ferromagnetic Wear Debris Determination and Diagnostics for Aero-Deriv.pdf

ASTM D7686-2011 9375 Standard Test Method for Field-Based Condition Monitoring of Soot in In-Service Lubricants Using a Fixed-Filter Infrared (IR) Instrument《用固定过滤器红外(IR)仪器现场监控使用中的.pdf