JUS M B2 153-1979 Retaining rings for shafts《轴止退环》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DIN ISO 10872-2012 Water quality - Determination of the toxic effect of sediment and soil samples on growth fertility and reproduction of Caenorhabditis elegans (Nematoda) (ISO 108.pdf

DIN ISO 10887-2003 Key type three-jaw drill chucks - Specification (ISO 10887 1999)《有键型三爪钻头卡盘 技术规范》.pdf

DIN ISO 10888-2003 Keyless type three-jaw drill chucks - Specification (ISO 10888 1999)《无键型三爪钻头卡盘 技术规范》.pdf

DIN ISO 10889-1-2006 Tool holders with cylindrical shank - Part 1 Cylindrical shank location bore Technical delivery conditions (ISO 10889-1 2004) English version of DIN ISO 10889-.pdf

DIN ISO 10889-2-2006 Tool holders with cylindrical shank - Part 2 Type A shanks for tool holders of special designs (ISO 10889-2 2004) English version of DIN ISO 10889-2 2006-01《带圆.pdf

DIN ISO 10889-3-2006 Tool holders with cylindrical shank - Part 3 Type B with rectangular radial seat (ISO 10889-3 2004) English version of DIN ISO 10889-3 2006-01《带圆柱柄的刀具夹 第3部分 矩形.pdf

DIN ISO 10889-4-2006 Tool holders with cylindrical shank - Part 4 Type C with rectangular axial seat (ISO 10889-4 2004) English version of DIN ISO 10889-4 2006-01《带圆柱柄的刀具夹 第4部分 矩形轴.pdf

DIN ISO 10889-5-2006 Tool holders with cylindrical shank - Part 5 Type D with more than one rectangular seat (ISO 10889-5 1997) English version of DIN ISO 10889-5 2006-01《带圆柱柄的刀具夹 .pdf

DIN ISO 10889-6-2006 Tool holders with cylindrical shank - Part 6 Type E with cylindrical seat (ISO 10889-6 2004) English version of DIN ISO 10889-6 2006-01《带圆柱柄的刀具夹 第6部分 圆柱基座的E型刀柄.pdf