JUS M C5 008-1988 Face-to-face imensions of valves with screued sockets《焊接插口的面对面阀门尺寸》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

EN 24006-1993 en Measurement of Fluid Flow in Closed Conduits - Vocabulary and Symbols《封闭管道内液体流量的测量 术语和符号(ISO 4006-1991)》.pdf

EN 24015-1991 en Hexagon Head Bolts - Product Grade B - Reduced Shank (Shank Diameter = Pitch Diameter)《六角头螺栓 B级产品 缩杆(杆径近似中径)(ISO 4015-79)》.pdf

EN 24159-1989 en Determination of Manganese Content Potentiometric Method《锰铁和硅锰铁中锰含量的测定 电势滴定法(ISO 4159-78)》.pdf

EN 24178-1992 en Complete Filled Transport Packages - Distribution Trials - Information to Be Recorded《完整满装运输包装 分布试验 记录的信息》.pdf

EN 24185-1993 en Measurement of Fluid Flow in Closed Conduits - Weighing Method《封闭管道内液体流量测量 称量方法(ISO 4185-1980)》.pdf

EN 24230-1989 Hand- and machine-operated circular screwing dies for taper pipe threads R series (ISO 4230 1987)《R系列 锥管螺纹的手动圆板牙和机动圆板牙(ISO 4230 1987)》.pdf

EN 24231-1989 Hand- and machine-operated circular screwing dies for parallel pipe threads G series (ISO 2431 1987)《G系列 直管螺纹的手动圆板牙和机动圆板牙(ISO 4231 1987)》.pdf

EN 24489-1993 en Sintered Hardmetals - Sampling and Testing《绕结硬质金属 取样和试验(ISO 4489-1978)》.pdf

EN 24491-1-1993 en Metallic Powders - Determination of Oxygen Content by Reduction Methods - Part 1 General Guidelines《金属粉末 用还原法测定氧含量 第1部分 通则(ISO 4491-1-1989)》.pdf