CSN 35 1086-1981 Non-rotating electromagnetic machines Methods of electromagnetic tests and measurement of winding resistance with direct current《电磁试验方法和直流线组电阻的测量》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM D4504-1994(2018) Standard Specification for Molded Polyethylene Open-Head-Pails for Industrial Shipping of Nonhazardous Goods《非危险货物工业运输用模制聚乙烯开口桶标准规范》.pdf

ASTM D4505-2005 Standard Specification for Preformed Retroreflective Pavement Marking Tape for Extended Service Life《延长使用寿命的预制反射路面标志带的标准规范》.pdf

ASTM D4505-2012 Standard Specification for Preformed Retroreflective Pavement Marking Tape for Extended Service Life《延长使用寿命的预制反射路面标志带的标准规格》.pdf

ASTM D4505-2012(2017) Standard Specification for Preformed Retroreflective Pavement Marking Tape for Extended Service Life《延长使用寿命的预制塑料路面标志带的标准规格》.pdf

ASTM D4506-2002(2006) Standard Test Method for Determining the In Situ Modulus of Deformation of Rock Mass Using a Radial Jacking Test《通过径向升高试验测定现场岩石物质变形模数的标准试验方法》.pdf

ASTM D4506-2008 Standard Test Method for Determining In Situ Modulus of Deformation of Rock Mass Using Radial Jacking Test《通过径向升高试验测定现场岩体物质变形模数的标准试验方法》.pdf

ASTM D4506-2013 Standard Test Method for Determining In Situ Modulus of Deformation of Rock Mass Using Radial Jacking Test《通过径向升高试验测定现场岩石物质变形模数的标准试验方法》.pdf

ASTM D4506-2013e1 Standard Test Method for Determining In Situ Modulus of Deformation of Rock Mass Using Radial Jacking Test《通过径向升高试验测定现场岩石物质变形模数的标准试验方法》.pdf

ASTM D4508-2006 Standard Test Method for Chip Impact Strength of Plastics《塑料碎片冲击强度的标准试验方法》.pdf