JUS M G0 100-1991 Acceptance code for machine tools Geometric accuracy of machines operating under no-load or finishing conditions《机床验收规范 无负责或组装完工条件下的操作性的几何精度》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DLA MS9578 REV D (1)-1996 BOLT MACHINE-DOUBLE HEXAGON EXTENDED WASHER HEAD DRILLED PD SHANK SILVER PLATED 4375-20 UNJF-3A《0 4375-20 UNJF-3A型镀银压力杆钻孔顶部垫圈加长双重六边锚杆机》.pdf

DLA MS9578 REV D NOTICE 1-1995 BOLT MACHINE-DOUBLE HEXAGON EXTENDED WASHER HEAD DRILLED PD SHANK SILVER PLATED 4375-20 UNJF-3A《0 4375-20 UNJF-3A型镀银压力杆钻孔顶部垫圈加长双重六边锚杆机》.pdf

DLA MS9578 REV D-1989 BOLT MACHINE-DOUBLE HEXAGON EXTENDED WASHER HEAD DRILLED PD SHANK SILVER PLATED 4375-20 UNJF-3A《0 4375-20 UNJF-3A型镀银压力杆钻孔顶部垫圈加长双重六边锚杆机》.pdf

DLA MS9684 REV A VALID NOTICE 1-2001 WASHER CUP LOCK - CRES AMS 5510《AMS 5510型防锈钢杯状锁定垫圈》.pdf

DLA MS9684 REV A VALID NOTICE 2-2006 WASHER CUP LOCK - CRES AMS 5510《AMS 5510型防锈钢杯状锁定垫圈》.pdf

DLA MS9684 REV A-1968 WASHER CUP LOCK - CRES AMS 5510《AMS 5510型防锈钢杯状锁定垫圈》.pdf

DLA MS9688 REV A REINST NOTICE 2-1994 BOLT MACHINE DOUBLE HEXAGON HEAD DRILLED 1 HOLE PD SHANK STEEL DIFFUSED NICKEL CADMIUM 375-24 UNJF-3A《0 375-24 UNJF-3A型镍镉压力杆单孔钻头双重六边锚杆机》.pdf

DLA MS9688 REV A VALID NOTICE 3-2001 BOLT MACHINE DOUBLE HEXAGON HEAD DRILLED 1 HOLE PD SHANK STEEL DIFFUSED NICKEL CADMIUM 375-24 UNJF-3A《0 375-24 UNJF-3A型镍镉压力杆单孔钻头双重六边锚杆机》.pdf

DLA MS9700 REV A (1)-2002 BOLT MACHINE-DOUBLE HEXAGON EXTENDED WASHER HEAD CORROSION AND HEAT RESISTANT STEEL 4375-20 UNJF-3A《0 4375-20 UNJF-3A型防腐蚀和耐热钢垫圈顶部加长双重六边锚杆机》.pdf