JUS N A5 951-1980 Guidance to publication 68-2-29 testEb Bump《出版物68-2-29指南 测试Eb：撞击》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

BS 2M 47-1990 Specification for retreading of cross ply tyres for aircraft《航空用绞口帘布轮胎翻新规范》.pdf

BS 2M 49-1997 Aircraft Hydraulic components Marking to indicate fluid for which component is approved《航空器 液压组件 已校准组件液体指示标记》.pdf

BS 2M 50-1986 Specification for clearance dimensions for tripod jacks for aircraft《航空用三角架千斤顶间隙尺寸规范》.pdf

BS 2M 53-1997 Aircraft Fluid systems Thermal shock testing of piping and fittings《航空器 液压系统 管道和管接头热冲击试验》.pdf

BS 2M 59-1993 Specification for interface of metric couplings 24 cone for aerospace fluid systems《航空航天流体系统用24圆锥形米制连接器接口规范》.pdf

BS 2M 63-1993 Specification for dimensions of aerospace fluid system port connection seal and fitting end《航空航天流体动力系统端口连接、密封和配件端部的尺寸规范》.pdf

BS 2S 129-1976 Specification for 18 9 chromium-nickel corrosion-resisting steel (titanium stabilized) billets bars forgings and parts (540 MPa limiting ruling section 150 mm)《18 9铬.pdf

BS 2S 130-1976 Specification for 18 9 chromium-nickel corrosion-resisting steel (niobium stabilized) billets bars forgings and parts (540 MPa limiting ruling section 150 mm)《18 9铬镍.pdf

BS 2S 131-1977 Specification for high thermal expansion steel billets bars forgings and parts (620 MPa limiting ruling section 150 mm)《高热膨胀钢方坯、棒材、锻件及零件规范(620MPa 限定等圆断面150mm)》.pdf