JUS N C6 120-1990 Coaxial cables for cable dlstribution systems and common antenna systems CBTV 2 019 3《用于布线系统和普通天线系统 CBTV 2，019，3的同轴电缆》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD ESA-M2D183-B-2004 NEOPRENE VACUUM FITTING - MOLDED TO BE USED WITH FORD WSS-M99P1111-A 《模制真空装置用氯丁橡胶 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD ESA-M2D197-A1-2009 THERMOPLASTIC POLYURETHANE ELASTOMER 80 DUROMETER A HARDNESS TO BE USED WITH FORD WSS-M99P1111-A 《硬度为80 A的热塑性聚氨酯弹性体 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD ESA-M2D198-A-2009 THERMOPLASTIC POLYURETHANE ELASTOMER 55 DUROMETER D HARDNESS TO BE USED WITH FORD WSS-M99P1111-A 《硬度为55 D的热塑性聚氨酯弹性体 与标准FORD WSS-M99P1111-A一起使用 列于标准FORD E.pdf

FORD ESA-M2D213-A-2009 POLYURETHANE MOLDING COMPOUND ETHER BASED TO BE USED WITH FORD WSS-M99P1111-A 《聚氨酯成型料 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD ESA-M2D223-A-2009 RUBBER ENGINE MOUNTS - INSULATOR TO BE USED WITH FORD WSS-M99P1111-A 《发动机架用绝缘体橡胶 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD ESA-M2D230-A7-2009 ELASTOMER POLYESTER - BLOW MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《弹性体聚酯吹塑塑料 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD ESA-M2D234-D-2010 POLYURETHANE MOLDING COMPOUND MODIFIED - POLYETHER BASED TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD ESW-M2D234-C)《聚醚基改性聚氨酯成型料 与标准FORD WSS-M99P1111.pdf

FORD ESA-M2D244-B-2009 RUBBER INSULATOR - EPDM NYLON FABRIC LAMINATE TO BE USED WITH FORD WSS-M99P1111-A 《橡胶绝缘体 三元乙丙橡胶（EPDM）尼龙织物层压板 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD ESA-M2D257-A-2009 ETHYLENE PROPYLENE RUBBER HYDRAULIC BRAKE SYSTEM - SEALS TO BE USED WITH FORD WSS-M99P1111-A 《液压制动系统用密封件用乙丙橡胶 与标准FORD WSS-M99P1111-A一起使用 》.pdf