JUS U J1 114-1986 Fire protection Fire resistance tests of beams《防火 横梁的防火测试》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSK-M3P1-C-2003 PHOSPHATE COATING ZINC TO BE USED WITH FORD WSS-M99P1111-A 《锌系磷酸盐涂层 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSK-M4D550-A-2010 THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO) 15% MINERAL FILLED MEDIUM HIGH IMPACT MOLDING COMPOUND HIGH SCRATCH RESISTANT MOLDING COMPOUND INTERIOR TO BE USED .pdf

FORD WSK-M4D550-A2-2010 THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO) 27% MINERAL FILLED - HIGH IMPACT TO BE USED WITH FORD WSS-M99P1111-A 《27%矿物填充的高抗冲热塑性聚烯烃（TPO）弹性体 与标准FORD WSS-M99P.pdf

FORD WSK-M4D550-A3-2010 THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO) 26% MINERAL FILLED MEDIUM HIGH IMPACT INTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《汽车内部用26%矿物填充的中等抗冲热塑性聚烯烃(TPO)弹.pdf

FORD WSK-M4D550-A4-2010 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) 24% MINERAL FILLED HIGH IMPACT MOLDING COMPOUND INTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《汽车内部用24%矿物填充的高抗冲热塑性.pdf

FORD WSK-M4D550-A5-2010 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) 24% MINERAL FILLED HIGH IMPACT MOLDING COMPOUND PAINTABLE TO BE USED WITH FORD WSS-M99P1111-A 《可印刷的24%矿物填充的高抗冲热塑性.pdf

FORD WSK-M4D550-A6-2010 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) 25% MINERAL FILLED MEDIUM HIGH IMPACT HIGH SCRATCH RESISTANT MOLDING COMPOUND MULTI SPOT DECOR INTERIOR TO BE USED.pdf

FORD WSK-M4D556-A-2010 POLYPROPYLENE COPOLYMER 22% MINERAL FILLED INTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《汽车内部用22%矿物填充的聚丙烯(PP)共聚物 与标准FORD WSS-M99P1111-A一起使用 [使用 FORD WSK-.pdf

FORD WSK-M4D556-A3-2010 POLYPROPYLENE COPOLYMER 22% MINERAL FILLED MEDIUM SCRATCH RESISTANT MOLDING COMPOUND INTERIOR TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSK-M4D55.pdf