KS 04-41 Pt 1-1977 KENYA STANDARD GLOSSARY OF TERMS RELATED TO ELECTROCHEMISTRY AND ELECTROMETALLURGY PART 1 GENERAL TERMS《肯尼亚电化学和电冶金学标准术语表 第2部分：通用术语》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

CSN 25 4185-1963 Limit ring thread NOT GO gauges Cylindrical pipe thread Diameter G 1 8 - G 3 1 2 《非穿过型规限制环形螺纹 圆柱形导管螺纹 Q 1 8 G 3 1 2 直径》.pdf

CSN 25 4186-1963 Reference gauges for ring thread NOT GO gauges Cylindrical pipe thread Diameter G 1 8 - G 3 1 2 《非穿过型规环形螺纹的校准量规 圆柱形导管螺纹 G 1 8 - G 3 1 2 直径》.pdf

CSN 25 4187-1963 Measuring parts of reference gauges for ring thread NOT GO gauges Cylindrical pipe thread Diameter G 1 8 - G 3 1 2 《非穿过型端螺纹校准量规的测量部件 圆柱型螺纹 G 1 8- - G 3 1 2-直径》.pdf

CSN 25 4188-1964 Limit thread calliper gauges Cylindrical pipe thread G 1 8 to G 3 1 2 《限螺纹孔径规 G Vs 到 G 3 Vs 圆柱型螺纹》.pdf

CSN 25 4190-1964 Master gauges for thread calliper gauges Cylindrical pipe thread G 1 8 - G 3 1 2 《螺纹孔径规标准规 G - a 到 G 3 x 2 圆柱形导管螺纹》.pdf

CSN 25 4250-1961 Cylindrical limit thread gauges bothsided Diameter from 8 to 30 Cycle thread《直径8mm到30mm双边圆柱形极限螺纹规 环形螺纹》.pdf

CSN 25 4251-1961 Screw gauges Cylindrical thread go gauges Diameter from 32 to 100 mm cycle thread《圆柱型螺纹穿过型量规 直径为32mm到100mm的环形螺纹》.pdf

CSN 25 4252-1961 Screw gauges Measuring parts for go limit of cylindrical thread gauges Cycle thread《圆柱形螺纹穿过型限的测量部件 环形螺纹》.pdf

CSN 25 4253-1961 Screw gauges Cylindrical thread not go gauges diameter from 32 to 100 mm Cycle thread《非穿过型规圆柱形螺纹 直径32 到100 mm的环形螺纹》.pdf