1、 KSKSKSKS KSKSKSK KSKSKS KSKSK KSKS KSK KS KS X ISO/IEC 17341 RW 120 mm 80 mm ：4.7 Gbyte 1.46 Gbyte( 4X ) KS X ISO/IEC 17341 ：2007 (2012 ) 2007 11 29 http:/www.kats.go.krKS X ISO/IEC 17341：2007 : ( ) ( ) SJ ( ) : (JTC1/SC23) () ( ) LG DS K&G () JMI LG DS KS X ISOIEC17341：2007 : (http:/www.standard.g
2、o.kr) ： ：2007 11 29 ：2012 12 28 2012-0829 ： ： (JTC1/SC23) ( 02-509-7262) (http:/www.kats.go.kr). 10 5 , . KS X ISO/IEC 17341：2007 i v .1 1 1 2 2 2.1 .2 2.2 2 2.3 2 2.4 (compatibility statement)2 3 2 4 .2 4.1 2 4.2 2 4.3 (DSV) 3 4.4 .3 4.5 3 4.6 .3 4.7 .3 4.8 .3 4.9 (interleaving) 3 4.10 (mark) 3 4.1
3、1 3 4.12 3 4.13 .4 4.14 (ReedSolomon code) .4 4.15 .4 4.16 .4 4.17 .4 4.18 4 4.19 .4 4.20 .4 5 .4 5.1 4 5.2 5 6 5 7 6 8 .7 8.1 .7 8.2 8 8.3 .8 9 .8 9.1 8 9.2 .9 9.3 19 9.4 (clamping) .10 KS X ISO/IEC 17341：2007 ii 9.5 10 9.6 (Wobble channel)( 2).10 9.7 ( 2) .11 9.8 .11 10 .13 10.1 13 10.2 13 10.3 .1
4、4 10.4 .14 10.5 14 10.6 .15 10.7 15 10.8 (Rim area) .15 10.9 .15 11 .16 11.1 .16 11.2 16 11.3 17 11.4 (runout)17 11.5 .17 12 .17 12.1 .17 12.2 .17 12.3 18 12.4 .18 12.5 18 13 .19 13.1 (Data Frames) .19 13.2 (Scrambled Frames)21 13.3 ECC (ECC Block configuration).22 13.4 (Recording Frames)23 13.5 NRZ
5、I 24 13.6 (Physical Sectors).25 13.7 RUN 26 13.8 .27 14 .28 14.1 28 14.2 29 14.3 29 14.4 .29 15 (General description of the Information Zone) 49 16 (Layout of the Information Zone).49 16.1 (Physical Sector Numbers：PSNs).49 17 (Lead-in Zone) .50 17.1 (Initial Zone)51 17.2 (Inner Disk Test Zone)52 17.
6、3 (Inner Drive Test Zone).52 KS X ISO/IEC 17341：2007 iii 17.4 1(Guide Zone 1)52 17.5 1(Reserved Zone 1)52 17.6 2(Reserved Zone 2)52 17.7 (Inner Disk Identification Zone).52 17.8 3(Reserved Zone 3)52 17.9 (Reference Code Zone).52 17.10 1(Buffer Zone 1) .52 17.11 (Control Data Zone).53 17.12 2(Buffer
7、Zone 2) .54 18 (Data Zone)55 19 (Lead-out Zone) .55 19.1 3(Buffer Zone 3)55 19.2 (Outer Disk Identification Zone) 55 19.3 2(Guard Zone 2) .56 19.4 4(Reserved Zone 4)56 19.5 (Outer Drive Test Zone).56 19.6 (Outer Disk Test Zone)56 19.7 3(Guard Zone 3) .56 20 (Assignment of Logical Sector Numbers：LSNs
8、) .56 21 (Formatting) 56 21.1 (Pre-formatting).57 21.2 (Background formatting) .57 21.3 (Sequential recording without formatting).58 22 (Disk Control Blocks) 59 22.1 (General format of Disk Control Blocks) 59 22.2 FDCB (Format of the Formatting DCB) 61 22.3 WDCB (Format of the write inhibit DCB) 65
9、23 (General) .67 24 (Method of testing) 67 24.1 (Environment) 67 24.2 (Reference Drive)67 24.3 (Definitions of signals).68 25 (Characteristics of the groove signals) .68 25.1 (Phase depth) .68 25.2 (Push-pull signal) 69 25.3 (Track Cross Signal)69 25.4 (Normalized wobble signal)69 25.5 (characterist
10、ics of the wobble).69 26 (Method of testing) 69 26.1 (Environment) 70 26.2 (Reference Drive)70 26.3 71 26.4 71 27 .72 27.1 (channel bit) .72 27.2 72 27.3 73 KS X ISO/IEC 17341：2007 iv 28 73 28.1 74 28.2 74 29 .76 29.1 .76 29.2 76 30 .77 30.1 .77 30.2 .77 31 (unit) .78 31.1 .78 31.2 .78 A() 80 mm 79
11、B() .82 C() .84 D() .86 E() 89 F() 93 G() 816 .96 H() 105 I() .109 J() 110 K() 111 L() 113 M() ADIP 114 N() .117 .120 KS X ISO/IEC 17341：2007 v e . ISO/IEC 17341：2006 . KS X ISO/IEC 17341：2007 . A() 80 mm B() C() D() E() F() G() 816 H() I() J() K() L() M() ADIP N() KS X ISO/IEC 17341：2007 (2012 ) RW
12、 120 mm 80 mm ：4.7 Gbyte 1.46 Gbyte( 4X ) Information technologyData Interchange on 120 mm and 80 mm Optical Disk using RW FormatCapacity：4.7 Gbytes and 1.46 Gbytes per Side(Recording speed up to 4X) 2006 3 ISO/IEC 17341, Information technologyData Interchange on 120 mm and 80 mm Optical Disk using
13、RW FormatCapacity：4.7 Gbytes and 1.46 Gbytes per Side(Recording speed up to 4X) . 1 4.7 GB 9.4 GB 120 mm . , . , , . RW . RW 1.46 GB 2.92 GB 80 mm . 120 mm . 80 mm A . . (7. ) , , , , . KS X ISO/IEC 17341：2007 2 , . 2 2.1 . . 2.2 2.1 , . 2.3 2.1 . 2.4 (compatibility statement) . . 3 . . . ISO/IEC 48
14、73：1991, Information technologyISO 8-bit code for information interchangeStructure and rules for implementation ISO/IEC 16448：2002, Information technology120 mm DVDRead-only disk ISO/IEC 16449：2002, Information technology80 mm DVDRead-only disk ECAM287, Safety of Electronic Equipment RW . L . 4 . 4.
15、1 ZERO ONE 2 4.2 KS X ISO/IEC 17341：2007 3 4.3 (DSV) ONE 1 ZERO 1 4.4 , 4.5 4.6 4.7 4.8 , . . 4.9 (interleaving) 4.10 (mark) , . 4.11 4.12 KS X ISO/IEC 17341：2007 4 4.13 4.14 (ReedSolomon code) 4.15 . 4.16 4.17 360 4.18 4.19 . 4.20 5 5.1 . 0.01 , 0.02 1.26 1.235 1.274 . 10 0 9 . 16 0 9 A F 16 . ZERO
16、 ONE . KS X ISO/IEC 17341：2007 5 0 1 , . n b (n1) (msb) , b 0 (lsb) . b (n1) . 2 (2s complementary) . Byte 0 (MSB) (LSB) . 8n bits , b (8n1) (msb) b 0 (lsb) . b (8n1) . 5.2 , . 6 a.c. (alternating current) ADIP (Address in Pre-groove) ASM (Asymmetry) BP (Byte Position) BPF (Band Pass Filter) CAV (Co
17、nstant Angular Velocity) CLD (Constant Linear Density) CLV (Constant Linear Velocity) d.c. (direct current) DCB (Disk Control Block) DCC (d.c. Component suppression Control) DSV (Digital Sum Value) ECC (Error Correction Code) EDC (Error Detection Code) EI (Extended Information) FDCB DCB (Formatting
18、DCB) HF (High Frequency) ID (Identification Data) IED ID (ID Error Detection code) LPF (Low Pass filter) LSN (Logical Sector Number) lsb (least significant bit) LSB (Least Significant Byte) msb (most significant bit) MSB (Most Significant Byte) NA (Numerical Aperture) NRZ (Non Return to Zero) NRZI (
19、Non Return to Zero Inverted) NSL (Normalized Slicing Level) OPC (Optimum Power Control) KS X ISO/IEC 17341：2007 6 PAA ADIP (Physical Address in ADIP) PBS (Polarizing Beam Splitter) PI (Parity of Inner-code) PLL (Phase Locked Loop) PP (PushPull) pp (peak-to-peak) PSN (Physical Sector Number) PO (Pari
20、ty of Outer-code) RIN (Relative Intensity Noise) RS (ReedSolomon code) RSV (Reserved)( ) RUN (Recording UNit) SNR (Signal to Noise Ration) SPS (Start Position Shift) SYNC (Synchronization code) 7 2 . . . . Type S . . 120 mm 4.7 GB, 80 mm 1.46 GB. Type D . . 120 mm 9.4 GB, 80 mm 2.92 GB. , . . . 1 .
21、KS X ISO/IEC 17341：2007 7 1 RW 8 8.1 8.1.1 . ：23 2 ：45 %55 % ：60 kPa106 kPa . 48 . . . , . 8.1.2 . . ：5 55 ：3 %85 % ：1 g/m 3 30 g/m 3 ：60 kPa106 kPa ： 10 /h S D KS X ISO/IEC 17341：2007 8 ： 10 %/h . , 2 . 8.1.3 . ：10 55 ：3 %90 % ：1 g/m 3 30 g/m 3 ：60 kPa106 kPa ： 15 /h ： 10 %/h . 8.1.4 ( J ). 8.2 ECM
22、A287 . 8.3 ECMA287 HB . 9 . . 9.1 2 . 2 . . KS X ISO/IEC 17341：2007 9 A F B G 4 C H 1 , H 2 , H 3 , H 4 D 1/4 I a , I b , I c , I d G E I 1 , I 2H 3 , H 4 2 C 1/4 (D) (A) (F) . (C) p s 100 . 9.2 . a) ( ) 655 nm nm 10 nm 5 b) (NA) 0.650.01 c) 0.6 mm 1.55 . d) 0.033 rms max. e) 35 %50 % 45 %60 % f) g) () 0.7 mW0.1 mW(d.c. 400 MHz ) h) F i) 134 dB/Hz *RIN(dB/Hz)10 log(a.c. /Hz)/d.c. 9.3 1 1 2 KS X ISO/IEC 17341：2007 10 1 . . . d.c. 20 MHz 1 dB . PLL D . 9.4 (clamping) (10.5 ). ( 3). d in 22.3 mm mm 5 . 0 mm 0 . 0 d out 32.7 mm mm 0 . 0 mm 5 . 0 . 3 F 1 2.0 N0.5 N .
