MSZ 1472-1957 《铸造成型肋骨剔除器》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM E1347-2006(2011) Standard Test Method for Color and Color-Difference Measurement by Tristimulus Colorimetry《用三色激励测色法测定颜色与色差的标准试验方法》.pdf

ASTM E1347-2006(2015) Standard Test Method for Color and Color-Difference Measurement by Tristimulus Colorimetry《使用三色比色法测定颜色和色差的标准试验方法》.pdf

ASTM E1348-2002(2007) Standard Test Method for Transmittance and Color by Spectrophotometry Using Hemispherical Geometry《用半球体几何形状的分光光度法测量透明度和颜色的测试方法》.pdf

ASTM E1348-2011 Standard Test Method for Transmittance and Color by Spectrophotometry Using Hemispherical Geometry《使用半球形几何学的透射比和颜色的分光光度标准试验方法》.pdf

ASTM E1348-2015 Standard Test Method for Transmittance and Color by Spectrophotometry Using Hemispherical Geometry《使用半球体几何形状的分光光度法测量透明度和颜色的标准试验方法》.pdf

ASTM E1348-2015e1 Standard Test Method for Transmittance and Color by Spectrophotometry Using Hemispherical Geometry《采用半球体几何形状的分光光度法测定透明度和颜色的标准试验方法》.pdf

ASTM E1349-2006 Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Bidirectional (45 0 or 0 45) Geometry《用双向几何形状的分光光度法测量反射系数和颜色的测试方法(45 0 或 0 45)》.pdf

ASTM E1349-2006(2013) Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Bidirectional (45° 0° or 0° 45° ) Geometry《用双向 (45度 0度 或者0度 45度) .pdf

ASTM E1350-2007 Standard Guide for Testing Sheathed Thermocouples Thermocouples Assemblies and Connecting Wires Prior to and After Installation or Service《测试铠装热电偶、热电偶组件及连接线安装或服务前后的.pdf