MSZ 4669-1983 《发电机充电，地下水加热机械型号及标志》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DIN 2096-1-1981 Helical compression springs made of round wire and rod Quality requirements for hot formed compression springs《圆线材及棒材制圆柱形螺旋压缩弹簧 热绕压缩弹簧的质量要求》.pdf

DIN 2096-2-1979 Cylindrical Coil Compression Springs Made from Round Rods Quality Requirements for Mass Production《圆棒材制圆柱形螺旋压簧 第2部分 大批量生产的质量要求》.pdf

DIN 2097-1973 Helical Springs Made of Round Wire Quality Specifications for Cold Coiled Tension Springs《圆线材制圆柱形螺旋弹簧 冷绕制拉伸弹簧的质量规范》.pdf

DIN 2098-1-1968 Helical springs Made of Round Wire Dimensions for Cold Coiled Compression Springs with Wire Diameter from 0 5 mm upwards《圆线材制螺旋弹簧 线材直径0 5MM以上的冷卷压力弹簧的尺寸》.pdf

DIN 2098-2-1970 Helical Springs Made of Round Wire Dimensions for Cold-coiled compression springs of less than 0 5 mm Wire Diameter《圆线材制螺旋弹簧 线材直径0 5MM以下的冷卷压力弹簧的尺寸》.pdf

DIN 2099-1-2003 Helical springs made of round wire and rod - Part 1 Information to be given in order to obtain the cold formed compression spring required Printed form A《圆丝材和棒材制螺旋式.pdf

DIN 2099-2-2004 Helical springs made of round wire and rod - Part 2 Information to be given in order to obtain the cold formed tension springs required printed form B《圆线材和棒材制螺旋弹簧 第.pdf

DIN 2099-3-2004 Helical springs made of round wire and rod - Part 3 Information to be given in order to obtain the hot formed compression spring required printed form C《圆线材及棒材制螺旋弹簧.pdf

DIN 2103-1993 Office machines inked ribbons woven fabric ribbons《办公室机器 油墨带 纺织纤维油墨带》.pdf