MSZ 10143-1964 《吊灯轨道技术要求和检验》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSK-M4D777-A4-2006 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) HIGH COLD IMPACT MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A (Use WSS-M4D952-A3)《高耐冷冲击热塑性聚烯径(TEO)弹性体成型料 .pdf

FORD WSK-M4D777-A5-2006 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) COLOR PIGMENTED MOLDING COMPOUND EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《汽车外部用着色的热塑性聚烯径(TEO)弹性体成型料 与标准FORD.pdf

FORD WSK-M4D777-A6-2006 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) COLOR PIGMENTED MOLDING COMPOUND EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《汽车外部用着色的热塑性聚烯径(TEO)弹性体成型料 与标准FORD.pdf

FORD WSK-M4D777-A7-2006 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) HIGH COLD IMPACT EXTRUSION MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《高耐冷冲击热塑性聚烯径(TEO)弹性体成型料 与标准FORD .pdf

FORD WSK-M4D779-A2-2010 POLYETHYLENE THEREPHTHALATE (PET) 35% GLASS FIBER MICA REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《聚乙烯对苯二甲酸酯(PET) 35%玻璃纤维 云母增强模塑材料 与.pdf

FORD WSK-M4D783-A2-2011 POLYPROPYLENE (PP) COPOLYMER 20% MINERAL FILLED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《20%矿物填充聚丙烯(PP)共聚物模塑材料 与福特WSS-M99P1111-A 一起使用》.pdf

FORD WSK-M4D783-A2-2016 POLYPROPYLENE (PP) COPOLYMER 20% MINERAL POLYPROPYLENE (PP) COPOLYMER 20% MINERAL TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSK-M4D788-A1-2010 POLYPROPYLENE (PP) COPOLYMER 40% MINERAL FILLED COLOR PIGMENTED MOLDING COMPOUND GENERAL PURPOSE TO BE USED WITH FORD WSS-M99P1111-A 《通用40%矿物填充的着色型聚丙烯(PP).pdf

FORD WSK-M4D788-A2-2011 POLYPROPYLENE (PP) COPOLYMER 40% MINERAL FILLED COLOR PIGMENTED MOLDING COMPOUND INTERIOR TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSK-M4D788-A1.pdf