MSZ 10253 4-1978 《MSZ 10253 4－78铁水泥栏杆 柱子》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST 17745-1990 Steels and alloys Methods for determination of gases《钢和合金 气体含量测定法》.pdf

GOST 17746-1996 Sponge titanium Specifications《海绵钛 技术条件》.pdf

GOST 17749-1972 Iet fuel Spectrophotometric method for the determination of dicycles aromatic (naphthalene hydrocarbons) content《喷射燃料 测定双环芳香族(碳氢化合物类萘)的光谱分析法》.pdf

GOST 17750-1972 Jet fuel Method for the determination luminometric number on the PLCHT instrument《喷气式发动机燃料 使用ПЛЧT仪器对光通量值的测定法》.pdf

GOST 17751-1979 Jet fuel Method of test for thermal oxidation stability under dynamic conditions《喷气发动机用燃料 动态条件下热氧化安定性的测试方法》.pdf

GOST 17752-1981 Hydraulic and pneumatic drive Terms and definitions《液压和气动传动装置 术语和定义》.pdf

GOST 17756-1972 Threaded plug-gauges with inserts with full-form of thread of diameters from 1 to 100 mm Design and basic dimensions《直径为1-100 mm的具有全螺纹插件的螺纹塞规 设计和基本尺寸规格》.pdf

GOST 17757-1972 Threaded plug-gauges with inserts with incomplete form of thread of diameters from 1 to 100 mm Design and basic dimensions《直径为1-100 mm的具有不完整螺纹插件的螺纹塞规 设计和基本尺寸规格》.pdf

GOST 17758-1972 Double-ended threaded plug-gauges with inserts of diameters from 2 to 50 mm Design and basic dimensions《直径2mm～50mm带镶块双头螺纹塞规 结构及基本尺寸》.pdf