MSZ 5316-1967 《学校用家具 学校用地板》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM D7870 D7870M-2013 4375 Standard Practice for Moisture Conditioning Compacted Asphalt Mixture Specimens by Using Hydrostatic Pore Pressure《使用流体静力孔隙压力调节压实沥青混合料试样中水分的标准实施规程》.pdf

ASTM D7871-2013 9375 Standard Test Method for Analysis of Cyclohexane by Gas Chromatography (Effective Carbon Number)《采用气相色谱法分析环己烷的标准试验方法(有效碳数)》.pdf

ASTM D7871-2018 red 5000 Standard Test Method for Analysis of Cyclohexane by Gas Chromatography (Effective Carbon Number)《采用气相色谱法分析环己烷的标准试验方法(有效碳数)》.pdf

ASTM D7872-2013 4375 Standard Test Method for Determining the Concentration of Pipeline Drag Reducer Additive in Aviation Turbine Fuels《测定航空涡轮燃料中管道减阻剂添加剂浓度的标准试验方法》.pdf

ASTM D7873-2013 0533 Standard Test Method for Determination of Oxidation Stability and Insolubles Formation of Inhibited Turbine Oils at 120° C Without the Inclusion of Water &4.pdf

ASTM D7873-2013(2017) 7500 Standard Test Method for Determination of Oxidation Stability and Insolubles Formation of Inhibited Turbine Oils at 120&x2009 &xb0 C Without the Inclusio.pdf

ASTM D7873-2013e1 0259 Standard Test Method for Determination of Oxidation Stability and Insolubles Formation of Inhibited Turbine Oils at 120° C Without the Inclusion of Water .pdf

ASTM D7873-2013e2 7053 Standard Test Method for Determination of Oxidation Stability and Insolubles Formation of Inhibited Turbine Oils at 120&x2009 &xb0 C Without the Inclusion of.pdf

ASTM D7874-2013 8750 Standard Guide for Applying Failure Mode and Effect Analysis (FMEA) to In-Service Lubricant Testing《在用润滑剂试验失效模式与效果分析(FMEA)应用标准指南》.pdf