MSZ 6297-1962 《装置4公斤的技术要求的设备 n》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM C185-2002 Standard Test Method for Air Content of Hydraulic Cement Mortar《水硬性水泥用灰浆的空气含量的标准试验方法》.pdf

ASTM C185-2008 Standard Test Method for Air Content of Hydraulic Cement Mortar《水硬性水泥用灰浆的空气含量的试验方法》.pdf

ASTM C185-2015 Standard Test Method for Air Content of Hydraulic Cement Mortar《水硬性水泥灰浆空气含量的标准试验方法》.pdf

ASTM C185-2015a Standard Test Method for Air Content of Hydraulic Cement Mortar《液压水泥砂浆空气含量的标准试验方法》.pdf

ASTM C1850-2017 Standard Guide for Improved Laboratory Accelerated Tests to Predict the Weathering and for Use in Developing Protocols to Predict the Design Life of Building Sealan.pdf

ASTM C1851-2018 Standard Practice for Determining the Extent of Cracking in a Sealant using the Difference between the Compressive and Tensile Modulus《用压缩模量和拉伸模量之差测定密封剂开裂程度的标准实施规程》.pdf

ASTM C1852-2017 Standard Guide for Product Selection Delivery Systems for Aerosol Foam Sealants and Adhesives《气溶胶泡沫密封剂和粘合剂的产品选择 输送系统标准指南》.pdf

ASTM C1853-2017 Standard Test Method for The Determination of Carbon (Total) Content in Mixed Oxide ((U Pu)O2) Sintered Pellets by Direct Combustion-Infrared Detection Method《采用直接燃.pdf

ASTM C1854-2017 Standard Test Method for Determination of Hydrogen (total from all sources) in Mixed Oxide ((U Pu)O2) Sintered Pellets by the Inert Gas Fusion Technique Followed by.pdf