MSZ 7522-1967 《滚珠轴承双向球星轴承的522系列》.pdf

相关资源

JIS F3428-1995 船上吊货用带滚柱轴承的铸钢滑轮.pdf

JIS F3429-1995 船上吊货用带滚柱轴承的钢板滑车.pdf

SH T 0338-1992 滚珠轴承润滑脂低温转矩测定法.pdf

YB 245-1964 滚珠太滚柱轴承用铬钢丝.pdf

HB Z 11-1974 滚珠轴承破坏力和摩擦力矩计算.pdf

YB 245-1964 滚珠及滚柱轴承用铬钢丝.pdf

GB T 16925-1997 混凝土及其制品耐磨性试验方法 (滚珠轴承法).pdf

ASTM D3336-2005e1 Standard Test Method for Life of Lubricating Greases in Ball Bearings at Elevated Temperatures《高温下滚珠轴承中润滑脂使用寿命的标准试验方法》.pdf

BS ISO 8443-2010 Rolling bearings - Radial ball bearings with flanged outer ring - Flange dimensions《滚动轴承 带法兰外圈的径向滚珠轴承 法兰尺寸规格》.pdf

STAS SR ISO 8443-1990 Radial ball bearings with flanged outer ring Range dimensions《折边外圈的径向型滚珠轴承 尺寸范围 》.pdf

猜你喜欢

FORD WSB-M15P43-A-2010 PERFORMANCE HEADREST BLOW MOLDED FOAM INJECTED TO BE USED WITH FORD WSS-M99P1111-A 《泡沫喷注吹塑头靠的性能 与标准FORD WSS-M99P1111-A一起使用 ［使用 FORD WSS-M15P39-B］》.pdf

FORD WSB-M16J16-A-2012 PAINT WATERBORNE 2 COMPONENT COMPLIANCE VOC PLASTICS EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSB-M17H164-A-2006 PADDING POLYURETHANE (PUR) SLAB POLYETHYLENE FILM COATED CONTROLLED CELL SIZE TO BE USED WITH FORD WSS-M99P1111-A 《孔尺寸控制的聚乙烯薄膜涂层的板状聚氨酯(PUR)衬垫 与标准FORD WSS.pdf

FORD WSB-M17H165-A-2006 INSULATOR COMPOSITE ARAMID POLYESTER ALUMINUM FOIL POLYESTER ALUMINUM FOIL TO BE USED WITH FORD WSS-M99P1111-A 《芳族聚酰胺 聚酯、铝箔、聚酯和铝箔复合材料绝缘体 与标准FORD WSS-M99P.pdf

FORD WSB-M17H167-A-2006 MAT POLYESTER FLAT NEEDLED LATEX BACKCOATED TO BE USED WITH FORD WSS-M99P1111-a (USE WSS-M99P32-B)《乳胶衬底的聚酯扁平针刺垫 与标准FORD WSS-M99P1111-A一起使用 使用标准WSS-M99P3.pdf

FORD WSB-M17H168-A-2006 PADDING POLYPROPYLENE ACRYLIC POLYESTER NEEDLEd COMPRESSION MOLDABLE TO BE USED WITH FORD WSS-M99P1111-A 《可模压的聚丙烯(PP) 丙烯酸 聚酯针刺衬垫 与标准FORD WSS-M99P1111-A一起.pdf

FORD WSB-M17H93-C10-2006 PADDING POLYURETHANE FOAM SLAB KNIT FABRIC REINFORCED MODERATE STRENGTH TO BE USED WITH FORD WSS-M99P1111-A 《中等强度织物增强的板状聚氨酯泡沫衬垫 与标准FORD WSS-M99P1111-A一起.pdf

FORD WSB-M17H93-C7-2006 PADDING POLYURETHANE FOAM SLAB WEFT INSERTION FABRIC REINFORCED REDUCED KNUCKLING TO BE USED WITH FORD WSS-M99P1111-A 《小转向节用引纬织物增强的板式聚氨酯泡沫衬垫 与标准FORD WSS-.pdf

FORD WSB-M17H93-C8-2006 PADDING POLYURETHANE FOAM SLAB POINT BONDED NON WOVEN FABRIC REINFORCED REDUCED KNUCKLING TO BE USED WITH FORD WSS-M99P1111-A 《小转向节用点粘合的无纺布板式聚氨酯泡沫衬垫 与标准F.pdf