MSZ 7661 3-1983 《MI 7661 3－83建筑模型 沙盘》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSS-M2D418-A3-2009 SILICONE (VMQ) RUBBER HIGH TEMPERATURE RESISTANT LONG LIFE GROMMET TO BE USED WITH FORD WSS-M99P1111-A 《长寿命垫环用耐高温硅酮（VMQ）橡胶 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSS-M2D440-B3-2017 FLUOROELASTOMER (FKM) 70 C 75 IRHD HARDNESS TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M2D451-B1-2008 HYDROGENATED NITRILE (HNBR) RUBBER 80 DUROMETER TO BE USED WITH FORD WSS-M99P1111-A 《硬度80的氢化丁腈橡胶（HNBR）橡胶 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSS-M2D451-B2-2008 HYDROGENATED NITRILE (HNBR) RUBBER 70 DUROMETER TO BE USED WITH FORD WSS-M99P1111-A (Shown on WSS-M2D451-B1)《硬度70的氢化丁腈橡胶(HNBR) 与标准FORD WSS-M99P1111-A一起使用.pdf

FORD WSS-M2D451-B3-2016 HYDROGENATED NITRILE (HNBR) RUBBER HIGH TEMPERATURE COOLANT SEAL 70 DUROMETER A HARDNESS TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M2D452-A4-2010 THERMOPLASTIC POLYESTER-ETHER ELASTOMER (TEEE) MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《热塑性聚酯乙醚弹性体（TEEE）成型料 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSS-M2D463-A2-2009 HYDROGENATED NITRILE BUTADIENE RUBBER (HNBR) SUPERIOR COMPRESSION SET REFRIGERANT AND OIL RESISTANT O-RINGS TO BE USED WITH FORD WSS-M99P1111-A (Shown on .pdf

FORD WSS-M2D470-A5-2004 DUCT EPDM LOW OIL SWELL MOLDED AIR INTAKE TO BE USED WITH FORD WSS-M99P1111-A (Shown on WSE-M2D470-A1)《模制进气口用低油膨胀性三元乙丙橡胶(EPDM)管 与标准FORD WSS-M99P1111-A一起使.pdf

FORD WSS-M2D470-A5-2013 DUCT EPDM LOW OIL SWELL MOLDED AIR INTAKE TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSE-M2D470-A1).pdf