MSZ 11272-1972 《圆形驱动主要标志》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD ESB-M4D360-A-2009 TUBING POLYVINYL CHLORIDE - HEAT SHRINKABLE TO BE USED WITH FORD WSS-M99P1111-A 《热缩型聚氯乙烯管件 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD ESB-M4D365-A2-2009 POLYPROPYLENE 40% CALCIUM CARBONATE FILLED TO BE USED WITH FORD WSS-M99P1111-A 《40%碳酸钙填充的聚丙烯（PP） 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD ESB-M4D365-B2-2009 EXTRUSION GRADE- STAMPABLE TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD ESB-M4D365-A2)《可冲压挤塑级 与标准FORD WSS-M99P1111-A一起使用 列于标准FORD ESB-M4D365-A2上》.pdf

FORD ESB-M4D366-A1-2008 NYLON (TYPE 6) 40% GLASS REINFORCED TO BE USED WITH FORD WSS-M99P1111-A 《40%玻璃增强的尼龙6 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD ESB-M4D366-A2-2008 NYLON (TYPE 6 6) 25% GLASS SPHERE - 15% GLASS FIBER FILLED TO BE USED WITH FORD WSS-M99P1111-A 《25%玻璃珠-15%玻璃纤维填充的尼龙6 6 与标准FORD WSS-M99P1111-A一起使用 列于标准FO.pdf

FORD ESB-M4D37-A-2009 POLYVINYL CHLORIDE (PVC) MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《聚氯乙烯(PVC)成型料 与标准FORD WSS-M99P1111-A一起使用 [使用 FORD WSB-M4D871-A1 FORD WSB-M4D.pdf

FORD ESB-M4D382-A-2009 LAMINATE VINYL - METAL - EXTERIOR GRADE TO BE USED WITH FORD WSS-M99P1111-A 《室外级乙烯基-金属层压板 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD ESB-M4D383-A1-2006 POLYOLEFIN COPOLYMER MODIFIED - EXTERIOR GRADE TO BE USED WITH FORD WSS-M99P1111-A 《室外级改性聚烯径共聚物 与标准FORD WSS-M99P1111-A一起使用 使用WSS-M4D952-A2》.pdf

FORD ESB-M4D383-A2-2006 POLYOLEFIN COPOLYMER LOW DENSITY - EXTERIOR GRADE TO BE USED WITH FORD WSS-M99P1111-A 《室外级低密度聚烯径共聚物 与标准FORD WSS-M99P1111-A一起使用 列于标准ESB-M4D383-A1上 使用WSS-.pdf